|
Title: how to check a wba 11 for power Post by: reefpatrol on July 13, 2011, 08:36:32 PM now for the next project on this machine.
its an igt s+ upright It has a WBA-11-ss that doesnt seem to be getting any power, or maybe just not turned on. I pulled it all out and it looks to be in good shape with no broken teeth, but when I turn the machine on it doesnt make a sound or anything. The part where the wires come out of the holder(the part the wba slides into) has three sets of wires with thier own plugs. Only one of them is plugged into something. From the holder it is the plug with four wires, (white, gray, purble, blue) it is plugged into a connector that has two wires (green with a blue stripe, and red with a blue stripe) those wires then continue on into the front door. The other two plugs coming from the holder are not plugged into anything. Should they be ? thanks Title: Re: how to check a wba 11 for power Post by: Slottex on July 13, 2011, 08:56:55 PM Does it have a power supply mounted on the side ?
Title: Re: how to check a wba 11 for power Post by: reefpatrol on July 13, 2011, 10:08:55 PM dont see anything on the side, but not exactly sure what to look for
Title: Re: how to check a wba 11 for power Post by: reefpatrol on July 13, 2011, 11:09:02 PM im going to say no power supply for the wba.
looked on ebay to see what they looked like. The only power supply I could find was the main one that is below the cash box, nothing on the side. |