|
Title: SET DENOMINATION PROBLEM Post by: CYRIL1973 on December 29, 2008, 10:10:33 AM HI,
Whenever I turn the machine on, it shows "set Denomination", even after pressing the test button and turning the reset key. I had a look at the options but I did not find any way to set the denomination... Any idea please? Thanks a lot! Cyril Title: Re: SET DENOMINATION PROBLEM Post by: SAT (aka GANDHI) on December 29, 2008, 10:45:19 AM HI, Whenever I turn the machine on, it shows "set Denomination", even after pressing the test button and turning the reset key. I had a look at the options but I did not find any way to set the denomination... Any idea please? Thanks a lot! Cyril Mostly you need a "Key" chip to enable that kind of configurations in IGT machines. Good luck and happy new year ;) Title: Re: SET DENOMINATION PROBLEM Post by: jay on December 29, 2008, 01:43:35 PM In a PE+ you simply press the SET button multiple times and it will get to a screen with a denomination on it. You then use the console buttons to change the value from 1c to 25.00 I think...might allow larger denominations...
You also set how many coins this way as well.... You do need a SET chip to enable the bill validator. Title: Re: SET DENOMINATION PROBLEM Post by: Ozzy on December 29, 2008, 02:34:23 PM set chip will allow you to change denom and set up BV
cheers O Z Z Y Title: Re: SET DENOMINATION PROBLEM Post by: CYRIL1973 on December 29, 2008, 02:41:04 PM Hi!
Thanks! Now the question is: Where to get the set chip? How to use it? Thanks!* Cyril Title: Re: SET DENOMINATION PROBLEM Post by: jay on December 29, 2008, 04:00:30 PM You can get the set chip from any of the vendors listed on the main page.
To use it you simply pull the program chip, insert the set chip, follow the onscreen instructions, replace the program chip. |