|
Title: Bally 6000 Monte Carlo code 77 Post by: keystone9 on July 23, 2011, 02:47:55 PM I have a 6000 Bally Monte Carlo with a code 77. What is that and how do I fix? Thanks BIll
Title: Re: Bally 6000 Monte Carlo code 77 Post by: proten on July 23, 2011, 02:58:54 PM This is what the Bally book says the code is :
77 Secondary Device Communication Fault During Game/Topbox. Wheel Feature Tilt Topbox tilt condition has occurred in the Monte Carlo and Lucky Wheel machines. Title: Re: Bally 6000 Monte Carlo code 77 Post by: FORDSBS on July 23, 2011, 03:39:14 PM Hi Bill
I'm getting old. I had a Bally wheel that code came up & I don't remember what I did. I have to see if I have any notes on it as to what I did. Ford PS I'm not much help Only note I found is wires become disconnected controller power fails fuse is blown Title: Re: Bally 6000 Monte Carlo code 77 Post by: keystone9 on July 23, 2011, 04:18:14 PM I am going to check that out Ford. Thanks Bill
Title: Re: Bally 6000 Monte Carlo code 77 Post by: keystone9 on July 23, 2011, 06:42:13 PM This is what I did to clear the problem. Mabe someone can explain to me how this worked. I took a board out of a known working game, did a ram clear and put it into the game with the code 77 and set the options, still did not fix the code 77. I then figured I would put everything back to original and put the board that belongs to the game back in after doing a ram on it and setting the options again. Bingo! Cleared the code and works fine. Why did this work? I have another with the same problem and I am going to try this same thing tomorrow. Bill
Title: Re: Bally 6000 Monte Carlo code 77 Post by: FORDSBS on July 23, 2011, 06:48:09 PM Did you do a clear on this board before?
When I clear them I'll do a clear 2 or 3 times to make sure it worked. Ford Title: Re: Bally 6000 Monte Carlo code 77 Post by: keystone9 on July 23, 2011, 06:57:24 PM Yes, one of the last things I do when shopping out a game is to replace the battery and do a ram and set the options. Mabe I have to do a ram more than once? Not doing much more today, sick from the heat. Got a fix for that? Bill
Title: Re: Bally 6000 Monte Carlo code 77 Post by: FORDSBS on July 23, 2011, 07:01:29 PM Yes, one of the last things I do when shopping out a game is to replace the battery and do a ram and set the options. Mabe I have to do a ram more than once? Not doing much more today, sick from the heat. Got a fix for that? Bill :159- :222- :140- :154- :151- :198- :152- :215- Title: Re: Bally 6000 Monte Carlo code 77 Post by: keystone9 on July 23, 2011, 07:05:18 PM That's the first thing that made me laugh today. Thanks
Title: Re: Bally 6000 Monte Carlo code 77 Post by: FORDSBS on July 23, 2011, 07:09:39 PM When I get a chance I'll have to take a run to see you & say Hi. Just to bull shit.
Ford P.S. Should I bring my tools with? :262- Title: Re: Bally 6000 Monte Carlo code 77 Post by: keystone9 on July 24, 2011, 05:58:34 PM Got it fixed. Dip switch #1 was not set correct. 4-5-6 needed to be switched on-off-on for secondary divice. Bill
|