New Life Games Tech Forums

**Video Slots** Gaming machines => BALLY Game Maker. => Topic started by: FORDSBS on July 23, 2011, 06:59:14 PM



Title: Door open problem (fixed)
Post by: FORDSBS on July 23, 2011, 06:59:14 PM
On a Game Maker 7200 I have 2 boards for. About a month ago when a friend was here went
to put other board in which I did not use for 2 month. It booted up but came up door open.
Pulled board in & out a few times & would not work. Other board would work fine. Today I got around to
check it out.
I did a clear & setup  -  same thing. I got the DEBUG chip out that I got from Jim @ BlueRidge  -did clear -
and it worked. The DEBUG chip WORKS.
THANKS ONE MORE TIME TO JIM.  :285-
Just wanted to post this in case anyone else has this problem.
Hey Reed, it works again.
Ford


Title: Re: Door open problem (fixed)
Post by: StatFreak on July 23, 2011, 07:41:43 PM
Glad you got it working.  :3-

For those who read this in the future and have a burner, I recommend reading this post (http://newlifegames.net/nlg/index.php?topic=13204.msg113779#msg113779). It's a different problem, but I suspect the same cause (data change/invalid data on the EEPROM), since the debug chip clears the EEPROM.


Title: Re: Door open problem (fixed)
Post by: reho33 on July 24, 2011, 04:54:54 AM
Good work Ford, knew that you would solve it.