|
Title: Newbie. PE DOA Post by: tex on July 29, 2011, 08:24:42 AM Totally new to this, so bear with me please. I have just picked up what I am pretty sure is PE draw poker machine. The fluros light up, but the monitor doesnt. I have check the PSU and the voltages seem to be correct as per what is written on the side of the tranny. The monitor doesnt seem to be lighting up. I check that it is getting 115v but i dont see any glowing of the tube.
Also there is a bunch of connectors which dont seem to be connected to anything ,so I am not sure if I am missing boards or what. I pressed the test button a few times and managed to get the DRAW/DEAL button on the front to light up but thats about it. Can someone give me an idea of where to start looking? Thanks TEX Title: Re: Newbie. PE DOA Post by: poppo on July 29, 2011, 09:29:33 AM Also there is a bunch of connectors which dont seem to be connected to anything ,so I am not sure if I am missing boards or what. It's always a good idea to post some pictures. Title: Re: Newbie. PE DOA Post by: tex on July 29, 2011, 06:15:58 PM I found a service manual online and from the looks of it there isnt actually anything missing. Still a bit confused what all the extra plugs are for. I have attached a pic for the lower section by the hopper where the bunch of cables are.
Title: Re: Newbie. PE DOA Post by: poppo on July 29, 2011, 06:32:12 PM Not sure about that machine, but it's not uncommon to have lots of extra cables for various things like player tracking stuff, meters that may have been removed, etc.
|