|
Title: Bally 6000 with 83F-O error Post by: cowboygames on July 31, 2011, 06:49:14 PM The cmos battery on my Monte went bad so I replaced it and now it comes up with the 83F-O error. Do I need to do a reset after a battery change? Or is this another problem? Thanks in advance for any help :89-
Title: Re: Bally 6000 with 83F-O error Post by: FORDSBS on July 31, 2011, 07:02:32 PM Last week I had to do a partial clear on one of mine. Put clear chips in & came up with that code.
I got another set of chips & that worked Ok. I didn't get to check the chips out & see if they were bad. When I replace Battery I do a clear. Title: Re: Bally 6000 with 83F-O error Post by: cowboygames on July 31, 2011, 07:32:47 PM Thanks Ford. I hadn't turned the machine on for a couple weeks, but it worked fine the last time it had been used before that battery went dead. Can those chips just go bad like that?
Title: Re: Bally 6000 with 83F-O error Post by: FORDSBS on July 31, 2011, 07:51:01 PM Thanks Ford. I hadn't turned the machine on for a couple weeks, but it worked fine the last time it had been used before that battery went dead. Can those chips just go bad like that? I don't think so. I didn't check why the one set did not work. Title: Re: Bally 6000 with 83F-O error Post by: a69mopar on July 31, 2011, 08:04:10 PM The cmos battery on my Monte went bad so I replaced it and now it comes up with the 83F-O error. Do I need to do a reset after a battery change? Or is this another problem? Thanks in advance for any help :89- You need to perform a Complete SafeRam Clear, using SafeRam Clear chips. W Title: Re: Bally 6000 with 83F-O error Post by: cowboygames on July 31, 2011, 08:25:16 PM That's what I was afraid of. I've got the chips, is it a pain in the ass? I do S2000s mostly, haven't ever done a bally
Title: Re: Bally 6000 with 83F-O error Post by: FORDSBS on July 31, 2011, 08:33:04 PM First time or 2 are a pain. I'll let Wayne explane it to you, he's better.
Title: Re: Bally 6000 with 83F-O error Post by: cowboygames on July 31, 2011, 08:34:57 PM Well crap Ford, that's not encouraging :97-
Title: Re: Bally 6000 with 83F-O error Post by: FORDSBS on July 31, 2011, 08:37:39 PM Do you have a manual?
The first time I did one Raz talked me through Title: Re: Bally 6000 with 83F-O error Post by: FORDSBS on July 31, 2011, 08:52:07 PM Cowboy, check your email. I send you a cheat sheet I use. It's a start.
You can change what you want. Ford Title: Re: Bally 6000 with 83F-O error Post by: cowboygames on July 31, 2011, 09:10:51 PM I've got a cd with the manual on it from when I bought the machine. My daughter's here this weekend so it'll be around August 8th before I have time to sit down and work with it. Thanks a lot for the info Ford :259-
Title: Re: Bally 6000 with 83F-O error Post by: a69mopar on July 31, 2011, 11:27:18 PM Follow the video, it's easy. Remember to hold the test and pseudo coin buttons for a complete clear.
Thanks, Wayne http://www.youtube.com/watch?v=fJ-yRz4AnYc (http://www.youtube.com/watch?v=fJ-yRz4AnYc) Title: Re: Bally 6000 with 83F-O error Post by: cowboygames on July 31, 2011, 11:46:57 PM thanks Wayne! I've got work for 3 days then a trip to Phoenix for 4 days so it'll be a week before I get to it, but I'll make use of that video :259-
Title: Re: Bally 6000 with 83F-O error Post by: a69mopar on August 09, 2011, 08:01:59 PM Please let us know how you made out.
w Title: Re: Bally 6000 with 83F-O error Post by: cowboygames on August 10, 2011, 01:47:39 PM Hi Guys, I went through the saferam complete clear today and after much banging of my head on the wall I've got the machine running :30- The only issues I have are that the machine seems to hesitate for a second after the reels stop before the insert coin light comes on and it allows another spin. Almost like it's gotta think about what it's going to do next after each spin. Not EVERY spin, but most. The other thing is, I would like to change the denom from penny to quarter and don't know how. I did get crazy reel action that I didn't have before though :89- Thanks for the help so far and any help to come in the future!
Title: Re: Bally 6000 with 83F-O error Post by: stormrider on August 10, 2011, 02:14:00 PM Hi Guys, I went through the saferam complete clear today and after much banging of my head on the wall I've got the machine running :30- The only issues I have are that the machine seems to hesitate for a second after the reels stop before the insert coin light comes on and it allows another spin. Almost like it's gotta think about what it's going to do next after each spin. Not EVERY spin, but most. The other thing is, I would like to change the denom from penny to quarter and don't know how. I did get crazy reel action that I didn't have before though :89- Thanks for the help so far and any help to come in the future! To change from penny to .25 you need to set the dip switches on DS 2 on the mpu also to turn off crazy reel spin set dip 7 to the on position DS2 also so for a .25 denom you want the following DS2 SW1-OFF SW2-OFF SW3-ON SW4-OFF Hope this helps...Oh you will have to do a clear when changing these switches. Tim Title: Re: Bally 6000 with 83F-O error Post by: cowboygames on August 10, 2011, 02:23:21 PM Thanks for the info Tim. Will I have to do a complete clear or will a partial be enough?
Title: Re: Bally 6000 with 83F-O error Post by: stormrider on August 10, 2011, 02:33:52 PM Thanks for the info Tim. Will I have to do a complete clear or will a partial be enough? No Problem, Complete make sure you write down all the settings you have in the machines 11d menu since this is a Monte unless you are familiar with the setup. Tim Title: Re: Bally 6000 with 83F-O error Post by: cowboygames on August 10, 2011, 02:37:13 PM I've got a list of the settings from the guy I bought it from in TX. Any idea why the machine hesitates so long after each spin? It didn't do that before it had the origional dead cmos battery issue.
Title: Re: Bally 6000 with 83F-O error Post by: stormrider on August 10, 2011, 02:45:50 PM I've got a list of the settings from the guy I bought it from in TX. Any idea why the machine hesitates so long after each spin? It didn't do that before it had the origional dead cmos battery issue. No but another clear wouldn't hurt in this case due to the fact you have crazy reel spin action going on. Are you using all the same chips as before ? Set the dips up as posted do the clear and see what happens. If that doesn't cure it post a vid of the hesitation you are talking about. Tim Title: Re: Bally 6000 with 83F-O error Post by: cowboygames on August 10, 2011, 02:56:46 PM Yeah, I might have changed another setting inadvertantly on the first attempt. I'm going to try again here shortly and will post back with the results
Title: Re: Bally 6000 with 83F-O error Post by: cowboygames on August 10, 2011, 03:29:12 PM Ok, finished another clear and reset, got my denom set to .25 and left the crazy reels feature on. Changed setting on DS1 dip switch 8 and that solved the slow reponse issue after each spin, turned it "on". Machine is working great now :136- :92- :136-
Title: Re: Bally 6000 with 83F-O error Post by: CaptainHappy on August 10, 2011, 07:36:56 PM :105-
Persistance pays off again!!! Not to mention great help from NLG members! You know what that means>>>>>>>> :50- :259- Karma Storm!!! :259- :50- CaptainHappy :95- Title: Re: Bally 6000 with 83F-O error Post by: FORDSBS on August 10, 2011, 08:40:18 PM :wa :136- Way to go cowboy.
Title: Re: Bally 6000 with 83F-O error Post by: stormrider on August 11, 2011, 02:57:15 PM Cowboy,
Glad it all worked out for you :3- :3- :3- :3- Tim Title: Re: Bally 6000 with 83F-O error Post by: cowboygames on August 11, 2011, 05:52:42 PM Me too :89- Thanks again everyone, another job that was made a whole lot easier with the great help of the members here! How can ya argue with that kind of teamwork? :131-
|