|
Title: Bally E-2000 Series, Reels Won't Stop spinning but shows no error codes Post by: Amachanic on August 08, 2011, 01:15:04 AM I have a Bally E2000 that has me puzzled. :103- It accepts and registers all coins. I have good tested reel readers and control board. Fuses and voltages are good too. You can play 1 to 3 coins, handle unlocks, reels spin, but don't want to stop, but I show no error codes. Only thing showing is my code 50 for opening the door to turn the machine on. I can reset the machine, but the same thing happens again? The handle does lock back out after reels were spun? Is this a problem with the kick and arm switches on the side of the reels? Last time I had an issue like this on a different machine the handle didn't lock out, but it was those switches.. :99-
Title: Re: Bally E-2000 Series, Reels Won't Stop spinning but shows no error codes Post by: proten on August 08, 2011, 01:56:08 AM I just had my E2243 do the same.
I replaced the kick switch and fixed it. Check the adjustment first then ohm it while pulling the handle. I would not close after the handle was pulled. Paul Title: Re: Bally E-2000 Series, Reels Won't Stop spinning but shows no error codes Post by: Amachanic on August 08, 2011, 02:18:14 AM I just had my E2243 do the same. I replaced the kick switch and fixed it. Check the adjustment first then ohm it while pulling the handle. I would no close after the handle was pulled. Thanks Paul.. I will check it out tomorrow. Gary Title: Re: Bally E-2000 Series, Reels Won't Stop spinning but shows no error codes Post by: Jim on August 08, 2011, 11:00:09 AM you can test those switches in test #3,
Jim Title: Re: Bally E-2000 Series, Reels Won't Stop spinning but shows no error codes Post by: Amachanic on August 09, 2011, 01:48:35 AM We'll it's fixed.. Come to find out both switches tested fine, but one of the cherry switches had a lot of play in the metal part that rides on the cam, and it was off the cam surface to one side. So after replacing that switch it's playing fine again.. Thanks for the help.. Karma + to Jim and Paul for there help...:88-
Gary |