|
Title: BV Removal Post by: cowboygames on August 30, 2011, 03:49:59 AM Hi guys, I pulled the BV from one of my games and now when I turn it on it comes up with the BV comm failure every time. I can open and shut the door to clear it and it works fine, but I'm wondering what I need to do to make the machine not look for it in the first place. I disabled the BV before I pulled it. Do I need to clear it or just run a netplex search from the programming menu? Thanks in advance for the help :89-
Title: Re: BV Removal Post by: Foster on August 30, 2011, 04:00:49 AM Just have it auto configure netplex in 4 I/O tests.
I swapped a friends WBA to a UBA and back to the WBA when he sold the machine. it gave us more trouble going from the WBA to the UBA then it did going from the UBA back to the WBA. Doing the auto configure fixed it. The error will actually go away on its own but doing the auto configure cant hurt. Title: Re: BV Removal Post by: cowboygames on August 30, 2011, 04:04:49 AM Thanks Foster, I'll give that a shot :89-
Title: Re: BV Removal Post by: cowboygames on August 30, 2011, 04:11:55 AM Yep, that took care of it, thanks again :3-
|