|
Title: Bally 6000 coin acceptance problems Post by: CYRIL1973 on August 30, 2011, 11:04:44 PM Hi,
Machine S 6000 from 2003. When door closed, the Micro Comparitor lights as well as the coin optics, it accepts one coin but refuses the other ones. Both Comparitor and optics are liit though. If I perform a ram clear, it will accept only one coin then will stop accepting again. I tested another optics: same deal, another MPU: same deal... I would like to install a coin comparitor in the place of this damn Micro comparitor but I don't know what the difference is as regards the wires... Any comment will be welcome. Thank you very much. Cyril |