|
Title: Universal Ultra MPU to Back Plane Pinout ECN1 and ECN2 Post by: jbshocks on September 07, 2011, 10:56:28 PM I compiled the pinouts for the main connector on ultra MPU. They are not complete but should hopefully point someone in the right direction to a dirty pin etc. A word of warning. The source documents were extremely difficult to read so it is very possible that there are errors. Please verify the circuit and don't let out the magic smoke. I will update it if I find missing parts. Hopefully this can help someone out.
Thanks uniman for providing the dead sea scrolls for this project. Title: Re: Universal Ultra MPU to Back Plane Pinout ECN1 and ECN2 Post by: uniman on September 07, 2011, 11:09:26 PM Nice work! :131- :131- :244- :244-
Title: Re: Universal Ultra MPU to Back Plane Pinout ECN1 and ECN2 Post by: uniman on September 07, 2011, 11:30:30 PM Let me add; ECN 2, A-14 is "REEL KNOCKER" momentary ground.
See this thread; http://newlifegames.net/nlg/index.php?topic=242.msg1938#msg1938 Also, ECN1, A-B-C 3&4's are 5 Vdc. Title: Re: Universal Ultra MPU to Back Plane Pinout ECN1 and ECN2 Post by: TZtech on September 08, 2011, 12:29:47 AM Hi
This may help to verify your pinouts. Let me know if you need any other info. Ian Title: Re: Universal Ultra MPU to Back Plane Pinout ECN1 and ECN2 Post by: jbshocks on September 08, 2011, 01:05:20 AM do you also have ecn 2? I take it this is from the newer non US model?
Title: Re: Universal Ultra MPU to Back Plane Pinout ECN1 and ECN2 Post by: uniman on September 08, 2011, 01:20:24 AM Scroll to the right, they're both on there. Almost missed it myself.
Thanks TZtech :89- Is that from the Sunrise manual? Title: Re: Universal Ultra MPU to Back Plane Pinout ECN1 and ECN2 Post by: TZtech on September 08, 2011, 01:41:59 AM Yep - Pretty sure its the same layout as the ultra.
|