|
Title: 3601 backplane using 550 cpu and i/o touchscreen issue Post by: squirrel on September 15, 2011, 01:41:45 AM I am setting up a home machine but have run into a little issue. I am using a standard LCD and have fixed a 5 wire touchscreen with a 3M controller to it. However, even though I have the wires going into J8 on the backplane, my touchscreen is still not being detected. I read a previous post from Raven. Westec gave the pin outs for the 550 backplane but I am using a 3601 backplane. Know goods: Touchscreen, LCD, CPU & IO, and backplane. Any suggestions.
Title: Re: 3601 backplane using 550 cpu and i/o touchscreen issue Post by: squirrel on September 20, 2011, 06:06:29 AM I was trying a serial touchscreen and switched to a capacitive and it worked
|