New Life Games Tech Forums

 :88- Hi can any tell us what SB-? go's with this game S2000 S3 coin Sizzling 7 Time Pay.  :37-

We just opened this game up and found that all of the proms are MIA.  :30- :30- :30-

Thanks Joeylc...


it's MrBellMan pic of the glass .. but it's the same game we have...  :5-

SB100097 is what's in my game

Thanks for the info :)

And..................... is also Crystal 7s 3R 3CM

Ron (r273)

hmmmmm the game wont boot with my copy  :30- :30- SUM = 4E34h .....   Can some one please check and see of this is the right checksum  :71-
Thanks Joey

SUM = 4E34h .....

I'm dumb about chips. All I know is what is on them.
How can I find what your looking for?

I show 2 check sums same chip
4E34 and 0C72

ok all im not all up on this s2000 stuff im stuck back in the land of the S+ ... when life was simple.....


OK we put in the SB100097 and did a ram CLR with IVC 224 the game wont boot with the sb100097 but it will boot with a sb1000065 ????
the SG's are SG000155 is this whats wrong ??? ......  :60- :60- 

target practice time  :200- :200- :200-

I have SG000363

Joey 4E34 is the right check sum.  I use a 97 clear chip.  Want me to send you a set of SG000363 and a 97 clear chip ??    :103- :103-

Joey  I had a bunch of machines with SG000155 game chips.  I started having a bunch of reel tilts, changed to SG000363 and everything is now OK.

ok all SB00097 with check sum 4E34 must be a bad chip   :8- :8-  Any one have any luck getting this to work ?? We tried it with buzz's SG no luck..  :30- :30-

FORDSBS what SG are you using ????  thanks joey

Hi Joey,

I have SB100097 in my 504 revision A MPU with:
SG000363 Stepper GME 1&2 chips
VS011GX1 Version Chip

I clear and key it with a 97 clear chip and a 31 key chip.  I run the clear process about 3-4 times just to make sure everything is nuked, and then proceed with the rest of the setup. Works every time on my setup.

Jason

ok all....well i have nailed it down to the sb100097 the game will boot with any other sb but this one, i am open for any suggestions if anyone has any ideas

Did you run the clear and key procedure with the same SG/VS chips installed on the board as I had noted above using the same key/clear version chips that I had mentioned?  If you want Joey, I can attach the procedure that I use if it would help.

Thanks,
Jason

yep we made a new set but no luck ....  hmmm here is the BAD file any one want to test it out...  im going mad ....  :25- :25-


This is for testing purposes only ....   :30- :30- DONT TRY THIS AT HOME KIDS  :30- :30-

And please don't Report me to the moderators   :97- :97- :97-  I dont want to get into hot water  :5- :5- :5-


"It was later found to be a corrupt file, file removed"

Ron (r273)

The reason that I ask if the key/clear procedure was done is because I've had experiences where I have been able to merely switch SB chips back and forth without having to perform a key/clear procedure and the games end up working and playing fine.  However, depending on the SB that is being switched, I have seen other circumstances that will throw up various errors on the VFD forcing me to perform a complete clear and key in order to get the game to work.  Not sure why...just the voodoo of the S2000 I guess.   :79-

I would also be curious if the SB100097 chip would work on another MPU as a last resort.  If other games are working on your current MPU, I would doubt the MPU is the issue.  I would think it's either the SB100097 chip that you are using, or all of the data has not been blown away causing the problems.

Anyway, I attached the procedure that I use if it helps.

Thanks,
Jason

I have SG000363, ford
As in pot 9

FYI: You only need to do a clear one time. The RAM and EEPROM on the motherboard are not magnetic or optical drives or media.

I just burned Joey's chip, give me a little time to test it in a machine.

I am out of 27C4096 or I would have burned one just to see.

But he has mail

Joey  I think the chip you posted is a piece of junk.   I have a 3 coin 3 reel Cristal 7s with a original SB100097 with a check sum 0C72  I put that chip in a different machine and it booted up.     :172-

That is good to know.

That the 4E34 checksum is from messed up chip.

Foster   Yesterday I got delivery of 150  ST M27C4002-12F1 I can send you some if you need them.    http://www.buyicnow.com/fincat.php?cat=79

Yes please, I would like some.
Thank you.

Am I suppose to guess how many ????????????????????????/ :25- :25-

How about 12 of them.

Joey,
Did you get that machine running yet?  :129-

As soon as i get the shop open it's first on my list of to do's for the day.  :3- :3- :61-

I just checked both chips on my reader.
The SB100097 that you posted up is toast.
Something happened to the data after the OFFSET address line 55D0 to the bottom of the file.
It's displaying "0404" from that point onwards to the end....throw that file away. It's trash and corrupted.

As far as the SB100097 file with the checksum of OC72, that one looks fine as I read it in my programmer.
There are 9 different percentage PAR sheets associated with it from LS012585 >>to>> LS012593
I don't have of those sheets but you-know-who may be able to get them for you if you want.  :96-

Need I ask who you know who is? :5- :200- :279- Or shall I assume that I know who you refer to... :103- :208-

CH :95-

P.S. Joey has the S2K curse virus....... He hates them, if he encounters one he has to stick his screwdriver into an S+ as a vaccine! :97-

Now Capt...Who the heck you're thinking of?  :97- :208-
Hmm...reminds me of Abbot & Costello>>>"who's on 1st?"  :96-

Personally, it took me a awhile to get one...when I did get one -
I didn't "tinker" with it for another long while.
However, after some time - I couldn't take it anymore... :60- so I stripped it
and put it back together just to see what makes it tick!  :97-

I've been having a blast trying 3 reel w/bonus reel kits, 5 reel kits,
Vision LCD's, and other bonus stuff!!
I have more fun stripping the puppy down and putting it back
together as something different than actually playing the darn thing! lolololol!!!!


Joey,
Your machine running yet?

(I sound like a broken record...lol)

Thank you Thank you Thank you all.......   it's up and running ... now the question is can you hit a 40 pin Eprom at 50 yards..  :287- :264-

If you will hold it in your left hand I will give it a try !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I can blow the *shut* out of it with a hand grenade... KABOOM!



Glad you got it going...now, take it apart and put it back together and report what else is wrong with it and we will try to help you with whatever questions you may have on your machine.





( okay...uh...whoops?!  :208- I will shut up now and take off!!!  :96- ) :138- :301-

 :wa :105-

The sun is shining again!  Glad you got it going Joey.

Jason

I just got back from helping someone with their S2000.
I will not mention any names, and do not ask!

Could not figure out why he kept getting no disp (on LED) even though the VFD was working, but would go blank now and then.
I was checking every thing, finally looked at the door wired and noticed that he had decided the wires for the VFD needed to be moved so the door hing would squeeze them severely when closed.
I moved the wires out of the hing, other than the 10 or so stacked errors I had to clear, machine works

You have the magic touch Foster!  :131-
Great job!   :244- :3-

(by the way...uh...a door hinge ends with an "e")  :186-  :96-






Foster thinking>>>"Whaddaya Bunker?!?!  a bloody schoolteacher now?!?!?" :72-