New Life Games Tech Forums

are these interchangeable, i have no 24v in a igame and want to see if swapping will fix

more pics

more info i looked at my other igames and they have the same ps as my s2000's, so i swapped and still missing 24v atiput of ballasts. the game works otherwise where should i look for the problem

 From what i was told the voltage is the same 13v and 25 v The AMP draw is higher on THIS 3Y power supply  See # after the voltage  ( 8.4A and 16.15A  VS 6.A and 11.5A which will run more stuff with out stressing the power supply  like barcrest slots , extra toppers and such more draw on the power supply.   it should work out to test the unit weather it will work in the long run i do not know . As many power supply that have been switched in and out of  machines who knows if it was even the factory original .I do not know how you would find the factory specs on  your given machine

so are you saying the 3y is better? that would be good then.  but now where to look for the missing 24v since both are doing same thing

I would follow the harness that comes out of the side of the power supply and check for power there.

so i had no power at either ballast or the cabinet fan, but had 24v at hopper. i was folloing the wires done and found a cut one right where a cut zip tie was. so apparently when player tracking was removed the wire got cut, this machine has been sitting an garage since the day i got it a couple years ago. so i had never even powered it up. spliced the cut wire and all is good,

except the burnt cap on the mpu, but hopefully getting my 044 upgrade later this week so doesnt really matter, will be a spare board