|
Title: Universal Ultra Battery Post by: LeisureTimeSlots on October 09, 2011, 06:57:41 PM Code 11. What battery should be used ?
Title: Re: Universal Ultra Battery Post by: uniman on October 09, 2011, 07:57:39 PM 3.6 volt Nicad battery, but this is NOT your problem.
Code 11 is low line voltage. Your mpu is not seeing a steady 5Vdc. Code 11 at startup sometimes is seen and goes away after one or two flashes in the win meter. If it stays flashing; 1 - try reseating the mpu board. (with power off) 2 - check your 5Vdc from power supply. At CN13, just behind the hopper, the pink wire is 5Vdc and black is the ground. Title: Re: Universal Ultra Battery Post by: LeisureTimeSlots on October 09, 2011, 11:10:26 PM Reseated the board a couple times and it cleared. Thanks,
Also, still looking for a cash box. |