|
Title: S+ hopper shelf size? Post by: stayouttadabunker on October 14, 2011, 05:59:07 PM What is the exact measurement of the circumference of an S+ U.S. quarter hopper shelf disc?
I was repairing an S+ hopper and I have a couple that actually seem about 3/32" too small? :103- Title: Re: S+ hopper shelf size? Post by: Buzz on October 14, 2011, 07:33:20 PM Mark 5 3/8 "
Title: Re: S+ hopper shelf size? Post by: zarobhr on October 14, 2011, 07:50:11 PM that may be a SBA size shelf which i am measuring at 5 5/16"
Title: Re: S+ hopper shelf size? Post by: Buzz on October 14, 2011, 08:08:21 PM that may be a SBA size shelf which i am measuring at 5 5/16" I didn't know we were building a Rocket ship to the moon !! What difference is a 1/16 of a inch going to make on a shelf wheel !!!!!!!!!!!!!!!!! For that matter 3/32 " will work. Title: Re: S+ hopper shelf size? Post by: zarobhr on October 14, 2011, 08:42:07 PM to use the smaller wheel for quarters yes it would work. but that 3/32 makes a difference if you want to use SBA dollars and only have a Quarter shelf.
Title: Re: S+ hopper shelf size? Post by: stayouttadabunker on October 14, 2011, 10:32:29 PM :208- :208- :208- Thanks for the answers guys! :97-
My guess is that these 2 other shelves I have are for the slightly larger Susan B. Anthony dollar coins. Another thing I've noticed while I put them under the microscope :209- is that they're slightly worn on the outside edge. Sometimes some coins would fall off the cliff...uh...shelf wheel. I basically just flipped them around and they work fine now. How I got these two weird ones... is beyond me... |