|
Title: Williams BB2 model, with OLED comm failure. Post by: woilly on November 02, 2011, 02:57:09 PM Hi,
Anyone have a clue on what could be the problem on BB2 with OLED comm failure ... (intermitent problem) The USB cable have been changed and the problem is on the oled panel. Main CPU ok. Any schematics for the oled panel board or part on board to change to sove the problem. thanks Title: Re: Williams BB2 model, with OLED comm failure. Post by: Gunnerbill on November 11, 2011, 12:00:41 AM First use the software to test the OLED deck. Test each Module one at a time, the easyiest problem could be the the deck has lost or has corrupt data. Solution reload data. OS's 14xx & below will use firmware 2.03, OS's 16xx will use firmware 3.02 or 3.03.
Other problem could be the Cap on the bottom of the board is bad or has loose connection Title: Re: Williams BB2 model, with OLED comm failure. Post by: woilly on November 11, 2011, 01:23:18 PM First use the software to test the OLED deck. Test each Module one at a time, the easyiest problem could be the the deck has lost or has corrupt data. Solution reload data. OS's 14xx & below will use firmware 2.03, OS's 16xx will use firmware 3.02 or 3.03. Other problem could be the Cap on the bottom of the board is bad or has loose connection Hi witch software your using? Do you mean to test it plugged into machine or bench test? thx Title: Re: Williams BB2 model, with OLED comm failure. Post by: Gunnerbill on November 11, 2011, 02:04:55 PM The software that I am talking about is the software that loads the firmware to the OLED deck. it is easier to load the firmware or test in the machine. It doesnt really matter, just as long as you have power to the OLED Deck.
I do know that these deck are very fussy. They do not like abuse. They do not like any type or water or drink spills. You can also try and take the board apart, Look at the actuator and springs. and clean all the contacts. Title: Re: Williams BB2 model, with OLED comm failure. Post by: Gunnerbill on November 11, 2011, 02:08:11 PM The software is called WMS USB Test Comm Tool setup, and I think it is at version 3.06
Title: Re: Williams BB2 model, with OLED comm failure. Post by: woilly on November 11, 2011, 02:35:58 PM Thank you very much....i will get the software ... so it will be easier to test it on bench....
If i find the problem i will post the solution... Thx Title: Re: Williams BB2 model, with OLED comm failure. Post by: Slotmaster on November 11, 2011, 04:22:48 PM The software is called WMS USB Test Comm Tool setup, and I think it is at version 3.06 3.07 is the latest availTitle: Re: Williams BB2 model, with OLED comm failure. Post by: woilly on November 12, 2011, 12:30:05 PM The software is called WMS USB Test Comm Tool setup, and I think it is at version 3.06 3.07 is the latest availHi, I tried and tried,,,, and i can't find any working link to download the soft. Do you know where i can get it? thank you. Title: Re: Williams BB2 model, with OLED comm failure. Post by: woilly on November 12, 2011, 01:52:20 PM The software is called WMS USB Test Comm Tool setup, and I think it is at version 3.06 3.07 is the latest availHi, I tried and tried,,,, and i can't find any working link to download the soft. Do you know where i can get it? thank you. FORGET IT... i found it... i will install it it in the next 2 min.. thx anyway.. Title: Re: Williams BB2 model, with OLED comm failure. Post by: woilly on November 12, 2011, 02:45:53 PM Hi SlotMaster, Thank you very much. I have tested the panel i have with the software (WMS USB Test Comm Tool setup) and reload the Firmware into the OLED Deck panel and buttons.
Problem is solved! thank you very much for you help. Title: Re: Williams BB2 model, with OLED comm failure. Post by: CaptainHappy on November 12, 2011, 05:31:39 PM COOL! Another problem solved! NLG's great Members to the rescue again!!! :89- :71- :89- :88- :259- to everyone here for helping, and being helped! (Woilly needed his first +1) :244- :244- :244-
CaptainHappy :95- :admin- Title: Re: Williams BB2 model, with OLED comm failure. Post by: stayouttadabunker on November 12, 2011, 10:13:10 PM I gave karmas to woilly & slotmaster!
You get nothing CH... :97- Title: Re: Williams BB2 model, with OLED comm failure. Post by: Gunnerbill on November 13, 2011, 11:13:25 PM Wow !!! I get no mention :-(
Title: Re: Williams BB2 model, with OLED comm failure. Post by: superparts on November 17, 2011, 09:11:25 PM I am glad to see you were able to get the buttons back up and running.
Title: Re: Williams BB2 model, with OLED comm failure. Post by: david1820 on December 17, 2011, 11:37:01 PM Hi, im new on this forum, where can download WMS USB Test Comm Tool 3.07 please i need your help, thanks.
Title: Re: Williams BB2 model, with OLED comm failure. Post by: woilly on December 18, 2011, 12:01:30 AM You can get it on the wms web site.
Mr.Woilly Title: Re: Williams BB2 model, with OLED comm failure. Post by: david1820 on December 18, 2011, 01:48:42 AM Thanks for your help but i can`t find the software, please help me whit a link.
Title: Re: Williams BB2 model, with OLED comm failure. Post by: Slotmaster on December 18, 2011, 12:28:22 PM you need an account first etc.
Title: Re: Williams BB2 model, with OLED comm failure. Post by: kforeman on December 18, 2011, 07:23:37 PM this should be it! :50-
https://secure.wms.com/wmssecure/main.asp Title: Re: Williams BB2 model, with OLED comm failure. Post by: ChizzleMonkey on December 19, 2011, 11:54:36 AM In case the above posts do not fix the communication issue with your button panel, you should also try to replace the usb controller chip at U6 on the board. Where firmware upload has failed, this has fixed others. Install a new U6 and reinstall the firmware using the afore mentioned tool.
Title: Re: Williams BB2 model, with OLED comm failure. Post by: jim7 on January 12, 2012, 12:23:11 AM <deleted by mod>
Thank you Title: Re: Williams BB2 model, with OLED comm failure. Post by: channelmaniac on January 12, 2012, 05:17:32 PM We do not condone giving/receiving/asking/paying/buying/selling/anything to do with copyrighted software.
If it's an original CD or EPROM/ROM/PROM that is different. Please do not ask for software on the forum again. Title: Re: Williams BB2 model, with OLED comm failure. Post by: jim7 on January 12, 2012, 06:51:50 PM I AM SO SORRY I DID NOT KNOW ITS COPYRIGHTED
|