New Life Games Tech Forums

whats it mean when you go to output i/o tests and under battery1 shows a 1 at the end then batery2 shows a 0 at the end? this is on a s2000.........  :103-

If you have both batteries on the MPU both should 1
I am thinking battery 1 is the CMOS backup battery (coin) and the battery 2 is the rechargable battery pack for tattle tale circuits.
 

i was curious what 1 means and 0 means? i was flippen through those tests and see what there all about.........im using a enhanced board....... i think i have a 3.0 flat battery plus a green battery....... so if bat1 says 1 and bat2 says 0 that could not be a good thing.......

Staz  Until you get a Low Battery error don't F*** with it.   :25- :25- :25-

i ant messing with it.... bad enuff i have to replace a reel motor..... thats gonna be such a project and i have to hope that solves my reel 5 tilt error. im getting on and off..... i think the wires coming out of my reel motor are loose or cuasing a short.....

Staz   I'm not sure what your motor looks like, but I would try folding the wires going to the motor back over the top rear of the motor and tie them up real tight with a tie strap. Naturally make sure the motor is working before you tie the wires down.  If this doesn't work, all your out is a tie strap.

Tell you what, seeing as how the machine is kind of broken I'll give you $200 for it and I'll pay the shipping.  ( That's my best offer )

 :208- :97- :208- :97- :208- :97- $200.......... i cant consider it broken i been playing it all day.......ts just wierd today i started it and it went to reel 5 tilt at start up then cleared by opening the door..... been running all day ran over 10k in it...lol....... i just realized in one year my progressive went from 1 mill to 1.5 mill at 5%........ if im correct thats over 10 mill went through this machine in a year hahahahahahaha

DAMN  It's near worn out, I thank you for being honest and telling me that. I'm going to have to reconsider that $200 offer. I mean I got enough JUNK.

you def dont want my machine its junk....... im throw it out 1st thing in the morning.....im waiting for a avp version....... :89- :89- :89-

Just out of curiosity, could a funky ass power supply affect the issues that staz is fighting?

Jason

Jason I think it's just a loose nut trying to find a loose wire.    :279- :279-   Did I say that, sorry Staz

Staz,

It is a shame that Buzz backed out from his generous offer... I hate for you to throw it in the trash... I can take it off your hands and give you a little dough for recycling value, then you would be on your way towards and AVP version!!! Now even though Buzz likes to call me MoneyBags, we all know that he is exadurating and trying to hide that is the true Moneybags. I can't quite offer what Buzz MB offered, but I can come close by offereing $199.95, with the differince being that I won't waive it in front of your face, and then drop out after teasing you... I will not back out.

DEAL???? :79-

CH :95-

that def came across my mind "power supply"........ i probably can confirm if its the reel motor wires if i take it out but i dread taking the whole top glass appart unless the machine stops working again......or till i get another reel motor.........  199.95 thats a good deal captain........i can flip that at the casino and make 10 grand..... :208- :208- :208- :97- :97- :97- :97-

A man with few words... :208-

Staz, here's an idea. Tell the captain :95- that for $199.95 you'll send him the stand, and the after he sends you the rest of the 10 grand you'll consider sending him the machine.  :30- :203- :97- :97- :97-

In the meantime, it just pains me to see you agonizing over your fickle machine's intermittent behavior. She's worse than a wife. Every time you want to play with her and try turning her on you're not sure if she's going to put out or suddenly develop a headache. If you're not willing to get a divorce, then I suggest that the two of you see a marriage counselor– one who understands slots and who can help her see how Reely Fortune-ate she is to have you taking care of her. Otherwise I'm afraid that your problems with her will only get progressively worse and you'll end up cruising local bars and casinos looking for a more attractive wheel outside of the home. :47-  :5- :200-

Stat :31-

You're too fast for me and my slow computer.  :200- :279- :208- :208-

Bunker,

BOY ARE YOU ASKING FOR IT!!!!  :24- :290- :125- :257- :189- :189- :189- :190- :203-
 :208-
CH :95-

haha! Come what may... ! :96-

And it may at that, but not from me. lol. :96- :200- Anyone who has been on NLG for more than five minutes knows that my motto is, "Why take three words to say something when fifty will work just as well?" :208- :208- :208-

SF :31-


(For those who are wondering, I deleted my empty post just as Bunker was quoting it.  :79-)

lol I agree...!
Anybody that knows me knows I'm just kidding most of the time anyways...
My serious work is usually in the beginning of the workweek or in emails or PM help.
NLG has always been a lot of fun for me as we try to receive and/or give help to each other.

[/quote]

Staz, here's an idea. Tell the captain :95- that for $199.95 you'll send him the stand, and the after he sends you the rest of the 10 grand you'll consider sending him the machine.  :30- :203- :97- :97- :97-

In the meantime, it just pains me to see you agonizing over your fickle machine's intermittent behavior. She's worse than a wife. Every time you want to play with her and try turning her on you're not sure if she's going to put out or suddenly develop a headache. If you're not willing to get a divorce, then I suggest that the two of you see a marriage counselor– one who understands slots and who can help her see how Reely Fortune-ate she is to have you taking care of her. Otherwise I'm afraid that your problems with her will only get progressively worse and you'll end up cruising local bars and casinos looking for a more attractive wheel outside of the home. :47-  :5- :200-

Stat :31-
[/quote]



that was great  :208- :208- :208- :208-  :259- for that one........

on a serious note this is whats going on....... my molex connector harness from my reel driver to my connector of my reel motor is creating all this....... as i move the wire harness back and forth, up and down, it either stops my wheel, shakes it in a still position or moves it slowly around as in normal start up.........how can a molex harness go bad? all of a sudden???? now correct me if im wrong is it......... A. my reel motor connector  B. my reel driver connector C. my harness connectors...... heres a couple of pics of my connectors on my harness to me they look okay but im a newbee lol.....

Those are the best pictures you've ever put up here on NLG Staz!!!  :244- :3-
Those are great! what the heck did ya do? Go to photography school?

Kidding aside...great pics!

Now, it really looks like the receptor pins are shot.
They're like loose women on the West-side streets of Manhattan.
They are spread out and will cause all kinds of intermittent contact problems -
not to mention...uh...reel errors.

You need new Molex housings and receptor pins... :89-
while you're at it, pick up a bag of male pins and do the other side as well.
Mouser.com has all the parts, including hand crimps, and pin removal tools.
If you don't want to try and do it yourself - I hear Idesign makes great harnesses!  :89-

How long is that harness?
Can I see a picture of it?