|
Title: S2000 Vision software question Post by: idylewild1 on November 10, 2011, 09:52:04 PM I have an old S2000 vision Bonus Spin R/W/B with star game. Does anyone know what software if needed to run this game. The SB chip is SB000021. All the others are to hard to read. The flash card is ATA100024 and BGM00011. Any info would be veey helpful. Thanks
Title: Re: S2000 Vision software question Post by: stayouttadabunker on November 10, 2011, 10:21:34 PM Other than the pair of SG chips...it sounds like you have it all?
Is there something missing Idyle? Title: Re: S2000 Vision software question Post by: idylewild1 on November 10, 2011, 10:49:06 PM The game chips are 4 meg. ---- never seen this before. I believe they are SG000018 chips. I have upgraded the RFA to RFA25. I upgraded the the ATA file to ATA100065 and the game chips to SG000380and the version chip to 11x1. The 380's with the old SB chips gives continious system errors. Sounds like software incompatibility. I go back to the old game chips and get protocol error. Which I suspect is the game chips and the ATA file incompatability. This all started after changing the monitor for one that had gone bad. Any help getting this thing going again would be appreciated. Thanks
Title: Re: S2000 Vision software question Post by: Foster on November 10, 2011, 10:56:30 PM You saying that they are not 27C080 or 27C801?
Title: Re: S2000 Vision software question Post by: idylewild1 on November 10, 2011, 11:03:04 PM They are ST 27C4001's. This machine worked before the monitor went out. Replace monitor and installed ATA card and assumed it would boot up. Not even close. But again I have never seen 4 meg game chips on an S2000 !!!!
Title: Re: S2000 Vision software question Post by: Foster on November 10, 2011, 11:20:07 PM That just means the machines Operating System is 1/2 size and probably many things are not supported that newer SG chips support.
Title: Re: S2000 Vision software question Post by: stayouttadabunker on November 11, 2011, 04:55:54 AM You didn't change out the MPU board did ya?
Other than changing out the monitor, I don't understand why the original stuff isn't working. Could it be possible that you removed/installed something with the power on? I corrupted stuff before by forgetting to hit the main power switch. Title: Re: S2000 Vision software question Post by: Ron (r273) on November 11, 2011, 09:54:46 AM I have an old S2000 vision Bonus Spin R/W/B with star game. Does anyone know what software if needed to run this game. The SB chip is SB000021. All the others are to hard to read. The flash card is ATA100024 and BGM00011. Any info would be veey helpful. Thanks FYI here is my info for the my game. I list this info for all my machines. VISION BOARDS AND PART NUMBERS #3 MACHINE 12/97, Model #9641880R (Bonus Spin Wild Star RW&B): Mother Board (Power Dist.) PN75905300 Rev A MPU Board (Main Board) PN75510501 Rev A (ID 0-611-45159) Multi-Media Board (On Main Board) None B/L Reel Controller Board PN76924100 960 Stepper Display Control Board (VFD) PN75117700 Rev B VAC Display PN75117800 Rev B Door I/O Board PN75427800 Rev A Cabinet I/O Board PN75427601 Rev A (For lighted reels) Cabinet I/O Harness PN 607-459-09A Reel Harness Need …. (PN60753604-A, for lighted reels) Game Version (GME1 Chip) SG00092 4CDC NJ Game Version (GME2 Chip) SG00092 B20F NJ Base Version (SBASE Chip) SB000022 Version (Jurisdiction) VS009SXO Flashdisk BGM00092, ATA10054, RFA10026 VFD Version (Chip) VFD 00007 6/30/00 (1-250) IGT NJ (D508) Bill Version Chip W13USA024 V3.34-27 Bill Head WBA-13-SS Transport WBA-13-SS Printer PSA-66-001N STPV2.2.1. Theoretical Payback 25¢= 97.45% Processing Board ID ID 0-611-45159 Sound (Sims Card) NONE Card Reader Chip AM29F040B-90PC (32 pin) Coin Comparator CC-16E, INH, 4C IGT 13 VDC CMI 66160177 (.05/.25) Button Lamps #658 T 3-1/4 14VDC .080 Amp. Reel Lamps #369 Wedge Denomination Lamp (Replacement) #25-3215 (LED White 4 Cluster MCM Elect.) Button Lamps (Replacement) #25-2945 (LED White 3 Cluster MCM Elect.) Candle Lamp # 194 Wedge Service Lamp (Inside) # 906 Wedge WBA Power Supply (Top) # 40810400 Rev A Power Supply (Bottom) # Rev B (inside cover board) Lighted Reels White reflectors Bally Card Reader 12 3/4” (1996) Mastercom 250 9VDC 1.5A Door Optics Cabinet Optics Coin Optics Tokens 1,000 Silver Double Cherries from E-Bay Ron (r273) Title: Re: S2000 Vision software question Post by: idylewild1 on November 11, 2011, 12:18:16 PM FoThanksund G0000018 GME1 and GME2 chips on the MS. list. They are 4 meg. chip and liste3d as PERSONALITY. Learn something everyday. These were the only game chips listed as 4 meg. Any thoughts on these.
Title: Re: S2000 Vision software question Post by: stayouttadabunker on November 11, 2011, 03:04:26 PM wow r273!
That's one heck of a parts list for a machine! Awessome!! :3- I've never seen anybody do that... Title: Re: S2000 Vision software question Post by: Ron (r273) on November 11, 2011, 07:06:14 PM wow r273! That's one heck of a parts list for a machine! Awessome!! :3- I've never seen anybody do that... You make a list like that when you have CRS! :97- Ron (r273) Title: Re: S2000 Vision software question Post by: CaptainHappy on November 11, 2011, 07:25:41 PM wow r273! That's one heck of a parts list for a machine! Awessome!! :3- I've never seen anybody do that... You make a list like that when you have CRS! :97- Ron (273) What list are we talking about??? I forgot! :5- :5- :200- :208- :259- For your efforts on the list! CH :95- |