|
Title: help with 97 sigma treasure wheel Post by: havasu on November 12, 2011, 09:30:43 PM ok picked up this machine and need some help.at power up reels spin slow and stop,at that point "now self testing wait awhile" appears on the screen then bill validator activates and hear sound like other machines do when door is opened. then thats it nothing else no error codes nothing in any of the three displays just dead ....thanks for the help if it helps it has a sg88m-2 board in it. i have resetted all the chips and plugs it has a good battery in it not sure what else to do
Title: Re: help with 97 sigma treasure wheel Post by: Koni on November 13, 2011, 05:34:17 PM Hold in the test button next to the power switch, then turn and hold the reset key, then turn on the power switch at the same time. Continue holding the test button and the reset switch until the reels turn and the door says ram cleared (about 15 seconds). The door should read turn reset key twice. This will hard clear the machine. -Koni
Title: Re: help with 97 sigma treasure wheel Post by: havasu on November 14, 2011, 12:24:18 AM :131- thank you that did the trick .working great now thanks again. ok it is loud as it can be how do i adjust the volume?
Title: Re: help with 97 sigma treasure wheel Post by: Koni on January 17, 2012, 10:28:18 PM Sorry it took so long to reply. With no credits, open the door and turn the reset key then press the max bet until you get to the test screen. Press the spin button then use the max bet to page to the sound settings. The bet one lowers the sound. Hit cash out to save the settings. There is also a warning sound setting there as well. -Koni
:131- thank you that did the trick .working great now thanks again. ok it is loud as it can be how do i adjust the volume? Title: Re: help with 97 sigma treasure wheel Post by: jpayne on March 19, 2012, 06:59:22 PM Can someone tell me where I can get a motherboard for my slot machine? I think I fried mine. Part number is SG88M-2. Thanks
Title: Re: help with 97 sigma treasure wheel Post by: jpayne on March 19, 2012, 07:00:23 PM need p/n SG88M-2, motherboard for my slot machine. Any Suggestions? Thanx
Title: Re: help with 97 sigma treasure wheel Post by: Mr. Dinoman on March 19, 2012, 10:45:34 PM What seems to be the problem with your machine?
Title: Re: help with 97 sigma treasure wheel Post by: jpayne on March 19, 2012, 11:22:26 PM The problem is that when i turn the machine on, nothing really happens. It powers on and the the regular lites come on, however the led lites don't come on. The bill acceptor doesn't light up, the first reel just kind of shakes, but does not spin. The other two spin. yesterday I was getting an error message regarding the first reel. Today nothing. Have used key to reset, but nothing happens. I m new at this and my first thot is motherboard, but if you have other suggestions, I would certainly try them. Thanx
Title: Re: help with 97 sigma treasure wheel Post by: Mr. Dinoman on March 19, 2012, 11:44:04 PM Make sure all the connections are tight...Check the power connection mostly and make sure there is no burn marks...It is the connector on the backside of the board and to the right...Is there any display or error code?
Title: Re: help with 97 sigma treasure wheel Post by: jpayne on March 20, 2012, 11:55:40 PM No the only error code in display is a (-) dash
Title: Re: help with 97 sigma treasure wheel Post by: Mr. Dinoman on March 21, 2012, 12:07:55 AM Can you post some photo's of the motherboard and dip switch setting...Also where the coin comparitor is... :211-
Title: Re: help with 97 sigma treasure wheel Post by: Jimise on March 21, 2012, 12:13:30 AM I see Mr Dinoman is on the case! :89- :211-
Can you post some photo's of the motherboard and dip switch setting...Also where the coin comparitor is... :211- |