|
Title: Bally 6000 bill validator problem Post by: Koni on November 13, 2011, 03:49:15 PM Hello all,
I got a bill stuck and not thinking I turned off the machine and pulled out the validator, then pulled the bill out without opening up the validator. When I put the validator back in and powered up the validator cycles but does not light up and does not take bills. Any ideas how to fix? I am hoping I don not have to do a clear because I don't have the codes. Thanks -Koni Title: Re: Bally 6000 bill validator problem Post by: b5srt on November 13, 2011, 06:34:01 PM Hello all, I got a bill stuck and not thinking I turned off the machine and pulled out the validator, then pulled the bill out without opening up the validator. When I put the validator back in and powered up the validator cycles but does not light up and does not take bills. Any ideas how to fix? I am hoping I don not have to do a clear because I don't have the codes. Thanks -Koni You shouldnt have to do a clear, remove the complete bill validator and open both flip up doors and make sure nothing is stuck inside. |