|
Title: IGT S+ Double Blackjack Makeover... Holes in Enclosure Post by: j$hort on November 17, 2011, 03:33:34 PM I noticed the following 3 holes that appear to be factory drilled in the upper (right hand) side of teh cabinet. Anyone have any ideas on what these are for and possible solutions to cover up...previous owner had electrical tape covering them, but we can do better than that...
Title: Re: IGT S+ Double Blackjack Makeover... Holes in Enclosure Post by: blueridgeslots on November 17, 2011, 03:50:20 PM Pics of what was there and ways some have covered in past, we use the last ones, 4" Stainless plumbing cleanout, countersunk bolt and wingnut or similar to hold in place, cut a 4" circle and should be able to cover up you holes or cut a cover from laminate btw can't believe nobody helped you on this already :25-
Title: Re: IGT S+ Double Blackjack Makeover... Holes in Enclosure Post by: blueridgeslots on November 17, 2011, 03:51:16 PM pics of a Bally done with smaller cover, IGT and 4" worked for us for years
Title: Re: IGT S+ Double Blackjack Makeover... Holes in Enclosure Post by: j$hort on November 17, 2011, 04:07:27 PM Hey that looks pretty good. I like the simple professional looking solution...thanks for the pics...
Title: Re: IGT S+ Double Blackjack Makeover... Holes in Enclosure Post by: CaptainHappy on November 17, 2011, 06:04:30 PM Pics of what was there and ways some have covered in past, we use the last ones, 4" Stainless plumbing cleanout, countersunk bolt and wingnut or similar to hold in place, cut a 4" circle and should be able to cover up you holes or cut a cover from laminate btw can't believe nobody helped you on this already :25- :259- to Blueridge for coming to the aid of the members again! :244- :244- :244-CaptainHappy :95- :admin- |