|
Title: Default error, Check controller #1 Post by: Matt1999 on November 17, 2011, 11:14:12 PM I have a Bally S5500 and CHAMII+. I am receiving a C10 and C14 error, which means I need to program the progressive.
I am having trouble connecting. I have tried two windows XP machines, two serial cables, and PSP v2 and PSP v3. I am receiving the Default error, Check controller #1 after pressing F1. Am I missing something? Thanks for the help! Title: Re: Default error, Check controller #1 Post by: Foster on November 17, 2011, 11:41:47 PM You need to jumper pins 1 and 5 of the Cham II+ Serial port.
If you can solder, just solder a wire to the underside of the cham II+ RS232 on cham II+ pins 5 4 3 2 1 9 8 7 6 Title: Re: Default error, Check controller #1 Post by: Matt1999 on November 18, 2011, 01:59:36 AM Thanks for the quick reply. I am not very good at soldering but I was able to use a thin wire to jump the 1 and 5 pin. I got lucky and it worked. It seems to be working now!
|