|
Title: IGT S+ Double Blackjack Makeover... Bill Validator Delete Post by: j$hort on November 18, 2011, 07:11:22 PM I have a machine that does not have the bill validator hardware installed. This is ok as I do not want paper money usage...just quarters. The bill validator bezel and hole where it used to be looks a little incomplete. I was wondering if there are any blank caps or bezels that can be used to blank this out..or any good looking and relatively inexpensive options. Thanks much....
Title: Re: IGT S+ Double Blackjack Makeover... Bill Validator Delete Post by: CaptainHappy on November 18, 2011, 08:09:59 PM I have a machine that does not have the bill validator hardware installed. This is ok as I do not want paper money usage...just quarters. The bill validator bezel and hole where it used to be looks a little incomplete. I was wondering if there are any blank caps or bezels that can be used to blank this out..or any good looking and relatively inexpensive options. Thanks much.... I seem to remember that someone here used Stainless Steel shiny chrome looking outlet box covers and fashioned a way to hold it in place? Here is a link to an example from Lowes. I way be totally wrong, but I think that something like this is what someone has used.... http://www.lowes.com/pd_192282-334-93151-SP-L_4294821472__?productId=1054663&Ntt=stainless+outlet+cover&pl=1¤tURL=%2Fpl_Wall%2BPlates_4294821472__s%3FNtt%3Dstainless%2Boutlet%2Bcover%26page%3D2&facetInfo= (http://www.lowes.com/pd_192282-334-93151-SP-L_4294821472__?productId=1054663&Ntt=stainless+outlet+cover&pl=1¤tURL=%2Fpl_Wall%2BPlates_4294821472__s%3FNtt%3Dstainless%2Boutlet%2Bcover%26page%3D2&facetInfo=) The thread about it must be somewhere here...... :200- CH :95- Title: Re: IGT S+ Double Blackjack Makeover... Bill Validator Delete Post by: CaptainHappy on November 18, 2011, 08:12:46 PM Found the thread...
http://newlifegames.net/nlg/index.php?topic=6647.msg58838#msg58838 (http://newlifegames.net/nlg/index.php?topic=6647.msg58838#msg58838) Look at the picture of the Gold Mountain machine. I really did not think I would find it so fast! :72- CH :95- Title: Re: IGT S+ Double Blackjack Makeover... Bill Validator Delete Post by: Foster on November 18, 2011, 09:17:58 PM Some one made chrome blanking plates I have seen them on eBay or might have been John and Nicole's site www.rudysdeals.com
Title: Re: IGT S+ Double Blackjack Makeover... Bill Validator Delete Post by: Foster on November 20, 2011, 04:55:28 AM Here is the eBay listing.
http://www.ebay.com/itm/IGT-SLOT-MACHINE-BILL-VALIDATOR-CHROME-BLANKING-PLATE-/370533758935?pt=LH_DefaultDomain_0&hash=item56458877d7 (http://www.ebay.com/itm/IGT-SLOT-MACHINE-BILL-VALIDATOR-CHROME-BLANKING-PLATE-/370533758935?pt=LH_DefaultDomain_0&hash=item56458877d7) Title: Re: IGT S+ Double Blackjack Makeover... Bill Validator Delete Post by: j$hort on November 20, 2011, 11:59:06 AM I'll bite on that blanking plate from ebay. probably a bit more expensive than a plate from hardware store but it will beat it on looks. Bring front and center it is worth the extra few bucks (shipping, etc). I plan to sell the existing bezel and it may be close to a wash. I will install once Io receive and post picture. I assume installation is pretty straight forward but any instruction on that would be helpful. I know I came to the right place and this 1st project has been fun so far...
Title: Re: IGT S+ Double Blackjack Makeover... Bill Validator Delete Post by: j$hort on November 28, 2011, 05:23:48 PM Received blanking plat and installed. Here are the before and after. I did run into an issue with the blanking plate sitting up a bit on the front of the chrome on the bottom edge, but was able to dremel out a little of the opening to get it to sit flush...I am very happy with the results.
Title: Re: IGT S+ Double Blackjack Makeover... Bill Validator Delete Post by: j$hort on November 28, 2011, 05:25:01 PM It was like this...
Title: Re: IGT S+ Double Blackjack Makeover... Bill Validator Delete Post by: j$hort on December 05, 2011, 04:02:14 PM Here is a full shot of validator delete . Any market for the old bill validator bezel???
Also, lots of scratches on the chrome around this...any ideas on how to remove...how about buffing with dremel and buffing bit? Title: Re: IGT S+ Double Blackjack Makeover... Bill Validator Delete Post by: stayouttadabunker on December 05, 2011, 06:53:29 PM You can hide the front of it with a bill acceptor sticker but your DBV doesn't work anymore... :25-
Yoeddy applied some sort of a finish to his machine... I think Poppo also painted his button deck with something. Get a hold of those guys... :89- BTW Didn't someone do a camo job on their machine once? |