|
Title: Bally 5000 plus reel error Post by: gposing on November 19, 2011, 12:58:43 PM Before I spend any money I need to confirm my finds. I was getting a 45 error (tilt on reel one) When I run the reel test I would see the reel jump out of sequence at position 5 and 9. So I switched reel 1 and 2, ran the test and no problems (for awhile). Now I am getting 46 error. So I would assume the problem is in the reel not the controller board. should I replace the entire reel or could it just be the motor or the controller that is attached to the reel.
Title: Re: Bally 5000 plus reel error Post by: Jancsi on November 27, 2011, 08:25:14 PM Tried clean opto on reel board?
Between motor and reel. |