|
Title: Protocol mismatch error Post by: idylewild1 on January 16, 2009, 06:00:52 PM Have a vision Diamond Fives machine that was generic. Replaced SB chip with a SB100102 and replaced the flash card with BGM00037. Want to convert to Diamond Fives Bonus Spin. Now I get a protocol mismatch error. Any help or ideas would be appreciated. New to vision machines. Thanks.
Title: Re: Protocol mismatch error Post by: blueridgeslots on January 16, 2009, 06:30:55 PM What SG's are in that game?
Title: Re: Protocol mismatch error Post by: idylewild1 on January 16, 2009, 06:55:33 PM The game chips are 341's. Thanks
Title: Re: Protocol mismatch error Post by: blueridgeslots on January 16, 2009, 06:58:53 PM They are new enough
Title: Re: Protocol mismatch error Post by: idesign on January 16, 2009, 08:04:38 PM Check the SB number again. It should be SB000102. What ATA is on the card. Also, what version chip are you using?
Title: Re: Protocol mismatch error Post by: idylewild1 on January 16, 2009, 08:32:01 PM Sorry the SB number is SB000102. The ATA number is 10054, the version chip number can't be read. Thanks for any help.
Title: Re: Protocol mismatch error Post by: idesign on January 16, 2009, 09:02:34 PM OK, according to the PSR for SG000341, ATA 10065 is required. You can drop back to an older SG chip set like SG000092 and that should fix it unless the version chip is incompatible too.
Title: Re: Protocol mismatch error Post by: idylewild1 on January 16, 2009, 09:09:58 PM I will give that a try. Thanks
Title: Re: Protocol mismatch error Post by: blueridgeslots on January 16, 2009, 09:32:49 PM I can't believe they updated the SG's that new and didn't have the game as a Bonus Game and still used a SS chip in there, I can't remember the ATA on the card sent but can fix you up with the correct SG's in the morning
Title: Re: Protocol mismatch error Post by: idylewild1 on January 16, 2009, 10:04:27 PM I had the files for SG000092. With them in the machine I get an error message in the LCD.
Multi Slave System Error Occurred Crash Type: Resourse Error File Open Error....\bgm00037\backgrnd.bmp It keeps cycling and trying to set up and this error comes up each time. Title: Re: Protocol mismatch error Post by: idesign on January 16, 2009, 10:16:52 PM Sounds like you have a corrupt file in the BGM folder.
Title: Re: Protocol mismatch error Post by: idylewild1 on January 16, 2009, 10:19:25 PM Will get a new flash card and try again. Thanks for all your help.
|