|
Title: Gamemaker jumper Settings Post by: tacman on September 17, 2008, 11:58:35 AM hotslot101
Re: Bally GM V7200 problems « Reply #12 on: June 11, 2006, 10:40:30 AM » -------------------------------------------------------------------------------- Jumpers for Bally Game Maker. W1 enables external antenna circuit W2 connects pin 7 u3 and GND W3 connects pin 6 uU3 and GND W4 connects pin 14 u19 and pin 4 u12 to GND W5 connects pin 14 u13 and pin 10 u12 to Vcc W6 connects pin 11 u12 and pin 15 u13 to GND W7 connects pin 2 u32 to HSYNC W8 connects pin 4 u32 to VSYNC W9 connects TP1 with VSYNC W10 connects TP2 with HSYNC W11 connects VCC and VDOOR W12 connects VBACKUP and VDOOR W13 connects pin 12 Q7 of u22 and pin 7 of u10 (allows high/low output signal for CON2 lockout) W14 connects pin pin 6 of u22 and pin 6 of u10 (allows for high/low output signal for CON1 lockout) W15 connects VSTBY to VBAT or GND W16 connects alarm to Q17 W17 enables BI battery circuit W18 connects pin 4 of pr8 and GND W19 connects pin 31 of EPROM socket MO to A19 W20 connects pin 31 of EPROM socket MO to Vcc W21 connects pin 29 of EPROM socket MO to WELS W22 connects pin 29 of EPROM socket MO to A15 W23 connects pin 30 of EPROM socket MO to A18 W24 connects pin 30 of EPROM socket MO to Vcc W25 connects pin 29 of EPROM socket M1 to WEHS W26 connects pin 29 of EPROM socket M1 to A15 W27 connects pin 31 of EPROM sockes P1/P2/P4/P5/P6 to Vcc W28 connects pin 31 of EPROM sockets P1/P2/P4/P5/P6 to BMA14 W29 connects pin 29 of EPROM sockets P1/P2/P4/P5/P6 to BMWEHS W30 connects pin 29 of EPROM sockets P1/P2/P4/P5/P6 to BMA14 W31 connects pin 31 of EPROM sockets P3/P7/P8/P9/P10 to Vcc W32 connects pin 31 of EPROM sockets P3/P7/P8/P9/P10 to BMA14 W33 connects pin 31 of EPROM sockets P3/P7/P8/P9/P10 to BMWEHS W34 connects pin 31 of EPROM sockets P3/P7/P8/P9/P10 to BMA14 W35 connects pin 31 of sockets GO and G1 to Vcc W36 connects pin 31 of sockets GO and G1 to VA18 Cheers Ozzy |