|
Title: Bally 6000 error 73.... Post by: chita-poker on December 06, 2011, 06:49:24 PM Hello everyone. I just got a bally 6000 slot machine. It was working fine when I picked it up. However, I live on the second floor, and after transporting it up the stairs, it's not working anymore :(. It said error 73. How can I fix it? thank you very much...
Title: Re: Bally 6000 error 73.... Post by: FORDSBS on December 06, 2011, 07:04:55 PM 73 Reel #3 Movement The reel moved at an inappropriate time.
Make sure reel wire is plugged in. & reel is in place WITH POWER TURNED OFF. Make sure MPU board is in all the way. Would not hurt after moving like that to check all wire are plugged in. Restart & see if it works. Title: Re: Bally 6000 error 73.... Post by: chita-poker on December 06, 2011, 07:23:12 PM I just checked the wires and everything looks in the right place. I took the MPU board out and put it back in. Sadly, it keep saying 73 2 :37-. Thank you for responding anyways....
Title: Re: Bally 6000 error 73.... Post by: b5srt on December 07, 2011, 08:46:08 PM I just checked the wires and everything looks in the right place. I took the MPU board out and put it back in. Sadly, it keep saying 73 2 :37-. Thank you for responding anyways.... open the door, hold the rest button for 10 seconds, release button and close the door, let the machine synchronize. This should clear the error.Title: Re: Bally 6000 error 73.... Post by: chita-poker on December 07, 2011, 09:45:16 PM "open the door, hold the rest button for 10 seconds, release button and close the door, let the machine synchronize" I try this many times, however, I never hold the button more than 5 seconds :25- . b5srt you are the man :131- :244- :3- It's working!!! Thank you very much :204-
Title: Re: Bally 6000 error 73.... Post by: b5srt on December 07, 2011, 11:41:28 PM "open the door, hold the rest button for 10 seconds, release button and close the door, let the machine synchronize" I try this many times, however, I never hold the button more than 5 seconds :25- . b5srt you are the man :131- :244- :3- It's working!!! Thank you very much :204- Happy to help, sometimes it takes a few times to clear an error. Title: Re: Bally 6000 error 73.... Post by: FORDSBS on March 24, 2012, 11:40:19 AM Any other suggestions if that does not work?
Also Swapped reels & harness. Title: Re: Bally 6000 error 73.... Post by: FORDSBS on March 24, 2012, 01:31:33 PM Any other suggestions if that does not work? Also Swapped reels & harness. Did a complete clear, that took care of error 73 |