|
Title: Running QLD game chips in NSW mk6/xcite machine Post by: punker on December 08, 2011, 05:25:11 AM Hi
I am wondering what do you have to do to use QLD gamechips in a machine setup for NSW software in a MK6/XCITE machine? The QLD machines don't use the same coms board do they? how do they differ? can you just bung the NSW coms board? anyway thanks. Title: Re: Running QLD game chips in NSW mk6/xcite machine Post by: t4799 on December 08, 2011, 05:38:48 AM I have a feeling that the Queensland machines require Q-com which needs to be connected during play, however I have never tried the Queensland mark 6 games. The mark 5 games lock up too. Unless your game is rare, it is probably best to find a US or NSW version of your game. Hopefully someone with knowledge of the Queensland system will reply shortly.
Title: Re: Running QLD game chips in NSW mk6/xcite machine Post by: punker on December 08, 2011, 06:00:48 AM what type of coms board do they use in QLD? IS THE Q-COM just like NSW CMS? can it be bunged to think its connected?
Thanks Title: Re: Running QLD game chips in NSW mk6/xcite machine Post by: palindrome on December 08, 2011, 10:41:25 AM Aristocrat developed a Q-Com emulator which runs under a dos window and will allow you to configure the EGM. The problem is getting your hands on it.
Title: Re: Running QLD game chips in NSW mk6/xcite machine Post by: SS308 on December 08, 2011, 08:08:32 PM Hi mate,
There is a QCOM bypass which all the New Zealand people use, You will have to make up a small unit to run it pretty basic but this will allow QLD & NZ games to run, Also you can't use the Comms PCB as not required. Will send the doc over the weekend for you. Title: Re: Running QLD game chips in NSW mk6/xcite machine Post by: reg on December 09, 2011, 04:31:03 AM Hi find4uto can you send a copy to me as well
Cheers, Title: Re: Running QLD game chips in NSW mk6/xcite machine Post by: SS308 on December 10, 2011, 01:30:00 AM PM me with email & I'll send it on to ya..
Title: Re: Running QLD game chips in NSW mk6/xcite machine Post by: Reelgames on December 14, 2011, 08:25:35 PM I use the Qcom bypass all the time with NZ versions of Aristocrat games but it has never worked for me on Qld ones. Admittedly, I have not tried to hard on too many games. Some other possible spanners in the works are the fact that Qld games do not use hard meters. NSW ones so. Qld do not use LAB Comms board, NSW do. Obvious question would be "Why would you run crippled Qld games on your machine?"
Title: Re: Running QLD game chips in NSW mk6/xcite machine Post by: DKM on December 19, 2011, 09:25:13 AM Because I was given some qld game chips.
Title: Re: Running QLD game chips in NSW mk6/xcite machine Post by: migglesnz1 on September 12, 2013, 05:37:42 AM do you still have the qcom bypass?
|