|
Title: New user, looks like a great forum Few questions Post by: Nascar Fan on December 09, 2011, 04:14:50 PM Hi to all. I have had a few older machines in the past and yesterday picked up two Bally 6000's and an IGT unknown model right now.
I know the 6000's need to be worked on as the guy that sold them gave me two clearing chips. With these machines, will the hopper pay out or is this a printer only deal? They all have hoppers. I know I will need to get a manual for them and plan on doing this ASAP. I just haven't had the chance to plug in the bally's yet to see what they do. Any advise before i get started? I'm an electrical tech by trade and can burn and read chips in I need to. I just need info. Thanks for any help offered. Title: Re: New user, looks like a great forum Few questions Post by: FORDSBS on December 09, 2011, 05:31:05 PM :172-
:238- More info. on games. :211- Ford Title: Re: New user, looks like a great forum Few questions Post by: Nascar Fan on December 09, 2011, 06:24:51 PM Looks like trouble on both. Blazing 7 has an "88FF" code in left window and dot dot something the the other. It is a system 6000.
The other is a triple 7 and it is clean as a pin inside. Speaker gives a copyright message on boot and then just a flashing red led on the cpu with on codes on readouts. I swapped cpu's with each other and the same error, flashing light followed the cpu's. My crappy IGT touchscreen is nasty inside and gives 3 error messages. Touchscreen error, bill vald. error & printer error. Title: Re: New user, looks like a great forum Few questions Post by: FORDSBS on December 09, 2011, 06:30:14 PM I send you a personal message .
You will have to do a clear & after that it might come up that your battery is dead. This might help till you get manual. Click on attachment @ bottom Title: Re: New user, looks like a great forum Few questions Post by: Nascar Fan on December 09, 2011, 08:12:05 PM I checked battery voltage and it is 3.2 on one and 2.4 on the other. Tried the ram clear with the chips I have and didn't do anything like the machine did on the video of the reset I watched. Maybe bad clear chips. What does the flashing led on the cpu mean? no codes on the front of one and 88FF on the other.
Title: Re: New user, looks like a great forum Few questions Post by: paul on December 10, 2011, 01:22:56 AM Battery 2.4v is to low is that the board with flashing lite
Title: Re: New user, looks like a great forum Few questions Post by: Nascar Fan on December 10, 2011, 08:38:36 AM Battery 2.4v is to low is that the board with flashing lite Orginally it was the board with 88FF that had the low battery. Now after the clear attempt, both are flashing. All 28/43 chips seated correct without bent pins. I'll throw at new battery in the low board later today and try the clear again. Thanks |