|
Title: Bally 5000+ 7.5vac circuit trouble Post by: Hunt.n.dig on December 21, 2011, 06:29:38 PM I have trouble with the 7.5vac circuit in a Bally 5000+ . I have verified that the transformer is putting out correct voltage. I pulled the 8amp fuse and tested from fuse back to transformer and had the 7.5vac. Checked the fuse and found zero resistance. When I move up the circuit to the door distribution board, I only read ~1vac+- at the 7.5vac test point. What I'm seeing is none of the small bulbs are lit. Thoughts?
Hunt Title: Re: Bally 5000+ 7.5vac circuit trouble Post by: stayouttadabunker on December 21, 2011, 06:38:32 PM 9 out of 10 it's a bad ground wire in that area.
Start checking wiring for continuity with your meter. |