|
Title: 044 board problem Post by: laneman on December 23, 2011, 12:16:51 PM I have a 044 board that plays fine after you clear it.Turn the machine back on after a hour or so and still good.Leave it sit overnight and wont boot.2nd amber light from the left not lit.If I clear the board works fine again.
I replaced the round "watch" battery so far,still does it.Would it be the other battery thats bad? Any ideas? Thanks in advance. Title: Re: 044 board problem Post by: laneman on December 24, 2011, 12:12:58 AM Anyone?
Title: Re: 044 board problem Post by: Yoeddy1 on December 24, 2011, 04:09:30 AM Do you have another 044 board to try? I was thinking heat too, but if you can reset it and it goes back to normal, I suspect the board might have a problem.
Jason Title: Re: 044 board problem Post by: laneman on December 24, 2011, 04:34:02 AM Machine works fine with another board.
Title: Re: 044 board problem Post by: stayouttadabunker on December 24, 2011, 04:53:51 AM Machine works fine with another board. That's good Laneman! :3- I'd leave it on for a couple of days to see if the problem comes back. If not, then you'll narrow it down to the other MPU board. If the problem comes back even with this new board in - then the problem may possibly lie with a power supply? :129- Title: Re: 044 board problem Post by: laneman on December 24, 2011, 05:14:52 AM If I put the board thats acting up in another machine the problem follows.Definitely something with the board.
Title: Re: 044 board problem Post by: stayouttadabunker on December 25, 2011, 01:37:45 AM I wonder if this might help any Lane?
Click on snapshot below to enlarge...>>> Title: Re: 044 board problem Post by: laneman on December 25, 2011, 12:49:46 PM Thanks bunker.Its just one of my LED's that arent lit.
The problem I described is with the legacy piggy back installed. The second amber LED right of the test switch will also go out if I have a Flashboard installed.Its on when the machine boots but goes out when its "zero checking flash". Title: Re: 044 board problem Post by: CaptainHappy on December 25, 2011, 06:44:17 PM Not sure if this helps or not..... I have been told that using the legacy adapter board you MUST use US juristiction software and that INTL software will not work. Do you have a different 3902 set that you can try? Do you have another legacy adapter board you can try? Also I do not think you told us if the machine works fine with an 044 flash game?
Just some out loud thoughts.... I hope you can get it fixed! CaptainHappy :95- Title: Re: 044 board problem Post by: laneman on December 25, 2011, 09:32:52 PM Thanks Captain...
The 044 board acts up with a Flashboard or a Legacy board.Ive tried different software also,its definitely something wrong with the 044 board itself. Title: Re: 044 board problem Post by: Slotmaster on December 25, 2011, 11:54:52 PM Thanks Captain... I have seen this a few times, the board is the issue and needs repair.The 044 board acts up with a Flashboard or a Legacy board.Ive tried different software also,its definitely something wrong with the 044 board itself. It can be fixed. Title: Re: 044 board problem Post by: laneman on December 26, 2011, 12:11:05 AM If I cant fix it,do you work on them?
Title: Re: 044 board problem Post by: Slotmaster on December 26, 2011, 12:51:54 AM If you need repair send a PM for more info
Title: Re: 044 board problem Post by: laneman on December 26, 2011, 03:30:03 PM :172-
Title: Re: 044 board problem Post by: laneman on December 27, 2011, 11:50:17 PM Still doing it.
Title: Re: 044 board problem Post by: laneman on January 04, 2012, 11:54:40 PM Fixed.
http://newlifegames.net/nlg/index.php?topic=16410.msg139071;topicseen#new (http://newlifegames.net/nlg/index.php?topic=16410.msg139071;topicseen#new) |