|
Title: Gamemaker "Game Disable" tilt message Post by: tacman on September 17, 2008, 12:12:20 PM Topic: Gamemaker V7000 " Game Disable" tilt message (Read 324 times)
pokernut Gamemaker V7000 " Game Disable" tilt message « on: July 21, 2006, 12:43:05 PM » -------------------------------------------------------------------------------- I have 2 upright V7000 Gamemakers. When the machines are turned on a GAME DISABLED / Hopper jam- error, close door to release tilt. message appears. After closing the door, the GAME DISABLED / hopper jam error reappears I've replaced the hopper with a known working one, also did the same with the BV and transport. Checked and reseated all wire connections, no change Any Ideas? Pokernut devotocd Re: Gamemaker V7000 " Game Disable" tilt message « Reply #1 on: July 23, 2006, 02:18:21 PM » -------------------------------------------------------------------------------- hi ,when you close the door ,is the machine taking this information.?i have a similar problem but i change the mains with a 2104 versions and now its ok idesign Re: Gamemaker V7000 " Game Disable" tilt message « Reply #2 on: August 16, 2006, 05:54:11 PM » -------------------------------------------------------------------------------- Quote from: pokernut on July 21, 2006, 12:43:05 PM I have 2 upright V7000 Gamemakers. When the machines are turned on a GAME DISABLED / Hopper jam- error, close door to release tilt. message appears. After closing the door, the GAME DISABLED / hopper jam error reappears I've replaced the hopper with a known working one, also did the same with the BV and transport. Checked and reseated all wire connections, no change Any Ideas? Pokernut Have you tried resetting the machine totally with an EEPROM clear and SAFERAM clear? pokernut Re: Gamemaker V7000 " Game Disable" tilt message « Reply #3 on: August 17, 2006, 04:48:21 AM » -------------------------------------------------------------------------------- That worked. Did the total clear and that erased the tilt message Thanks Pokernut idesign Re: Gamemaker V7000 " Game Disable" tilt message « Reply #4 on: August 17, 2006, 09:50:01 AM » -------------------------------------------------------------------------------- Quote from: pokernut on August 17, 2006, 04:48:21 AM That worked. Did the total clear and that erased the tilt message Thanks Pokernut Good, glad that fixed it. |