|
Title: WBA to uba in bluebird Post by: Karaoke Mike on December 30, 2011, 02:34:59 PM Hi,
I had a working WBA 12 in a bluebird which worked fine but is the weakest link in the machine. So I decided to put a uba 10 in. The Jpn setting on the backplane are jpn1 2-3. Jpn2 1-2 jpn3 2-3 which worked for the WBA. Now I'm getting billvall comm error. The red power light is on the uba. It is flashed and communicates with a laptop. I have 2 transporters and both do the same. One has the 3 pins under neath the transporter together set on rs232 and the other has 2 together and the other one away from them set on rs232. I'm using the same wire harness and adapter as was used with the working WBA. Help please. Thanks |