|
Title: S6000 88FF Error returning after power off Post by: JSipe on December 30, 2011, 02:50:21 PM Hello all! I am working on a 6000 proslot. After complete ram clear, 88ff returns after the power is off for a bit. Battery is brand new. I checked and had 3.6 volts at the test points. Maybe it loses connection?? Any help would be appreciated.
Jerry Title: Re: S6000 88FF Error returning after power off Post by: b5srt on December 30, 2011, 08:19:10 PM Hello all! I am working on a 6000 proslot. After complete ram clear, 88ff returns after the power is off for a bit. Battery is brand new. I checked and had 3.6 volts at the test points. Maybe it loses connection?? Any help would be appreciated. do you have the battery jumper in place ? Fixed some broken quote tags and removed duplicate quotes. -knagl Title: Re: S6000 88FF Error returning after power off Post by: JSipe on December 30, 2011, 08:26:02 PM You know, I'm not sure where that is. There is a jumper by the battery that is on but I'm not sure if it is correct. I am working on this board for a friend. I will check the next time I get a chance.
Thank you! |