|
Title: Bill Acceptor Wont Stop Cycling Post by: NYCypher on December 30, 2011, 08:47:42 PM Everything was working fine. I did a saferam clean and when I started the game maker up again, the bill acceptor keeps making sounds... the thing in the back keeps winding up and going back down. Any Ideas?
Title: Re: Bill Acceptor Wont Stop Cycling Post by: FORDSBS on December 30, 2011, 08:52:44 PM Pull the cash box out & put it back in. Make sure it's in all the way .See if that helps
Title: Re: Bill Acceptor Wont Stop Cycling Post by: FORDSBS on December 30, 2011, 08:53:59 PM See your new.
:238- :238- Ford Title: Re: Bill Acceptor Wont Stop Cycling Post by: NYCypher on December 30, 2011, 09:09:53 PM I entered the wrong bill acceptor in the settings... all is well now... Thanks for the tips though.
Title: Re: Bill Acceptor Wont Stop Cycling Post by: FORDSBS on December 30, 2011, 09:17:15 PM :244- :244- Glad you got it working
Title: Re: Bill Acceptor Wont Stop Cycling Post by: azgamingslots on January 12, 2012, 08:03:53 PM FYI: i had a game maker the BV kept cycling -everything else on the machine worked ok.
-eventually traced it to the power supply -it was the -12v leg (was only putting out -6v) Title: Re: bill valdater cycling, lights on hopper blinking and monitor flashing Post by: icdeadfish on September 08, 2012, 11:01:32 PM ballys game maker has worked fine for years unpluged for about 3 months have a buyer then plugged it it the dbv keeps cycling the hopper has a red and green light blinking and the monitor flashes on and off at the same pace as the dbv and hopper lights I tried reset button tried hopper in and out and removed and replaced stacker box had to turn it on to get it out seemed it was in the middle of a cycle when I turned it off. Im frustrated Would a battery cause this much problems? I know someone out there is going to give me the right answer and life will go on with a donation to NLG under there name thanks :208-
Title: Re: Bill Acceptor Wont Stop Cycling Post by: proten on September 08, 2012, 11:10:55 PM check the power supply
Title: Re: Bill Acceptor Wont Stop Cycling Post by: icdeadfish on September 09, 2012, 12:21:58 AM thanks I think the 3.6v battery is shot do you think that will do it too thanks
Title: Re: Bill Acceptor Wont Stop Cycling Post by: proten on September 09, 2012, 12:56:32 AM I have never seen it happen :209- but all kinds of weird things :117- happen when the battery gets low.
Title: Re: Bill Acceptor Wont Stop Cycling Post by: azgamingslots on September 23, 2012, 12:26:59 AM if the battery is low, you get a blue screen with message: saferam fail
if the battery is dead, the screen flashes and bill validator cycles. the battery is ALWAYS the first thing you check when a slot has a catastrophic malfunction. |