|
Title: Display "issue" . PROBLEM SOLVED..THANKS Post by: cp on January 03, 2012, 09:31:04 PM I changed the GME 199's to 363's and the Version eprom too. Never seen this one before. The display on the right side of reels are showing win/credits and coins played on different levels... Attached picture... I just played MAX BET... "3" coins... Win symbol gives me 6 credits... The "6" coin win... shown on left side of middle display. Credits left to play is: 26 "2" is on the right side of (middle) display and the 6 is below / left side. The coins played ..."3" is on the bottom right. :103- The game theme: Triple Double Stars. The lower display below and left side ( blue readout area ) pretty much just displays " PLAY 3 COINS " ... :103- I've never seen this before ! ! ??? Title: Re: Display "issue"... ? ? Post by: kforeman on January 03, 2012, 10:19:48 PM i would guess that the game still had 2 credits on it when you snapped the picture? i suspect that the "6" on both levels is some type of display malfunction and shouldn't be there at all. :103- dunno the cause but maybe swap the 7seg if you have another and continue down the line until you find the faulty component. good luck!
Title: Re: Display "issue"... ? ? Post by: Tilt on January 03, 2012, 10:22:36 PM My guess is that you have the wrong 7 segment display type set in the options for your machine. Looks like it's set for 5-5-2, but should be 6-6-3. I thought you'd get an error message if you select the wrong one though.
Title: Re: Display "issue"... ? ? Post by: kforeman on January 03, 2012, 10:27:04 PM My guess is that you have the wrong 7 segment display set for your machine. Looks like it's set for 5-5-2, but should be 6-6-3. I thought you'd get an error message if you select the wrong one though. good catch Tilt, i agree that this is a possibility; check your keychip settings cp. i think the machine should tilt if the incorrect display setting is selected but it's worth a check. i'm pretty sure i've seen this or something very similar in the past but i can't put my finger on it; i'll probably remember next week when i'm changing the oil on my car or something...damn ADHD :25- Title: Re: Display "issue"... ? ? Post by: Foster on January 03, 2012, 10:39:56 PM That definitely looks like you have the wrong display type set in your key chip config menu.
I am surprised it let you play. Title: Re: Display "issue"... ? ? Post by: cp on January 03, 2012, 11:21:42 PM i would guess that the game still had 2 credits on it when you snapped the picture? i suspect that the "6" on both levels is some type of display malfunction and shouldn't be there at all. :103- dunno the cause but maybe swap the 7seg if you have another and continue down the line until you find the faulty component. good luck! When I took the picture... I had just "won" 6 credits. The game has 26 credits left. I had played "3" coins. I went back and key chipped a couple times...and tried to find a display option / setting ...Couldn't find the option for the different display settings. Title: Re: Display "issue"... ? ? Post by: kforeman on January 03, 2012, 11:28:32 PM When I took the picture... I had just "won" 6 credits. The game has 26 credits left. I had played "3" coins. I went back and key chipped a couple times...and tried to find a display option / setting ...Couldn't find the option for the different display settings. does the paytable show a 6 credit win for the single TS symbol? you need to cashout before keychipping as well; this could be why you can't see the 7seg setting when in the keychip menu. if you don't want to cashout i think you can see what it is currently set at by pressing the white button on the mpu and navigating to the keychip options. Title: Re: Display "issue"... ? ? Post by: Tilt on January 03, 2012, 11:29:18 PM This is where it's at on mine, with SG000363's installed.
7.2 KEY CHIP CONFIG II 7.2.7 7 Segment Display type Title: Re: Display "issue"... ? ? Post by: cp on January 04, 2012, 01:15:07 AM This is where it's at on mine, with SG000363's installed. 7.2 KEY CHIP CONFIG II 7.2.7 7 Segment Display type I do not have that (Segmanent Display Type ) in my menu. Here's the eprom numbers: SG000199. Base eprom is ...100273 Version: VS0009GX9 Do I need to change SG / or Base ? Title: Re: Display "issue"... ? ? Post by: Tilt on January 04, 2012, 01:32:24 AM The Base is correct, it's what you need to have installed for a 3CM Triple Double Stars game. I would upgrade the SG000199s to 363's. 199's I'm guessing probably pre-date the 6-6-3 display that you have and that's why your display is the way it is, but the machine isn't giving you an error for the display mis-match.
Title: Re: Display "issue"... ? ? Post by: kforeman on January 05, 2012, 12:17:22 AM The Base is correct, it's what you need to have installed for a 3CM Triple Double Stars game. I would upgrade the SG000199s to 363's. 199's I'm guessing probably pre-date the 6-6-3 display that you have and that's why your display is the way it is, but the machine isn't giving you an error for the display mis-match. :212- |