|
Title: Gamemaker Safe Ram Failure Post by: tacman on September 17, 2008, 12:23:01 PM Topic: SafeRam Failure (Read 215 times)
xoticgt SafeRam Failure « on: January 19, 2008, 10:43:54 PM » -------------------------------------------------------------------------------- I have a 1996 Game Maker and when I turn it on I a message that reads : Battery Voltage Low SafeRam 1 FAILURE SafeRam 2 FAILURE if I replace the battery will this fix the problem and also is there anybody have a manual and a repair book on this machine the SMI is a V7000,How many games does it play 10 or 6? I just bought it Thanks, John StatFreak Re: SafeRam Failure « Reply #1 on: January 19, 2008, 10:53:49 PM » -------------------------------------------------------------------------------- I don't own a Game Maker, but genrerally when you change the battery you will need to perform a ram clear on the machine afterwards to bring it up. btw, welcome to the forum John! I'm sure that someone with more Game Maker experience will chime in here in a few minutes. Blueridgeslots Re: SafeRam Failure « Reply #2 on: January 20, 2008, 05:19:54 AM » -------------------------------------------------------------------------------- You will need a Ram Clear chip after changing the Battery as well midas Re: SafeRam Failure « Reply #3 on: January 20, 2008, 07:06:05 AM » -------------------------------------------------------------------------------- Yes, first change the battery. It's soldered on the board. Be careful not to burn the board traces. Then, use a CLEAR chip to reset the options. the clear chip goes in socket P10. Also, Turn dipswitch 1, position 7 and 8 on. Attached is the Clear procedure. dansgames |