|
Title: fluorescent light not working Post by: Traneman on January 05, 2012, 02:22:48 AM Hi I'm a new member and just acquired and Bally 809-zh.
this machine has been sitting in a shed for over 10 years.After reading all the posts here I have gotten it to work pretty well.I went thru everything and cleaned, reoiled and got everything freed up. The fluorescent lights are not working. Is there a way to test this.Not sure if its the tube,starter or transformer. Also I need to get the GE 55 bulbs as well as GE 63a bulbs. Is there a good source for these. Thanks for any help you can give me.I'm a complete newb Title: Re: fluorescent light not working Post by: jbshocks on January 05, 2012, 02:37:54 AM starter is cheap, I would try one and see. First reseat the bulb.
Title: Re: fluorescent light not working Post by: Amachanic on January 05, 2012, 02:46:09 AM I would try one of the other light starter that you know work on the light in question. If it doesn't light then it's usually the bulb. As for the #55 & #63 bulbs they can be bought throught Foxsslots listed on the home page here or at EBay
Gary Title: Re: fluorescent light not working Post by: Traneman on January 07, 2012, 06:03:43 PM It ended up being both the bulb and starter. I ordered all the other bulbs from foxslot will be excited to get this
all lighted up. Thank you. Title: Re: fluorescent light not working Post by: sparky1977 on January 08, 2012, 01:31:44 AM if you go to www.electricalproducts.com.au they will get you any of the bulbs and starters for any machine even for 110v applecations
just email them with a picture and they will reply that's what i done hope it helps |