New Life Games Tech Forums

My BB PS died (the "ATX" style supply below the bill receiver). Looking here on the forums, it was stated that the two main filter capacitors were normally the main culprit for failure. I replaced those caps and reinstalled the supply. All power LEDs on both the bulkhead and the CPU are lit. Upon power up the CPU began its normal memory check. After a few seconds, the screen went blank. I repeated this a second time with the same result. On a final attempt, the CPU does not appear to be booting as nothing is displayed on the screen.

I've plugged my desktop into the touchscreen to make sure it is not the problem. The screen displays fine.

Any ideas guys? Is it possible the supply is still weak for one of the voltage outputs even though the power LEDs are all lit?


Thanks,