New Life Games Tech Forums

**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games. => Topic started by: fisch on January 23, 2012, 08:46:32 PM



Title: $1 slot token help
Post by: fisch on January 23, 2012, 08:46:32 PM
I have a 1996 Double wild cherry IGT slot machine that takes Fannini slot tokens right now.  If I were to buy a mix of real slot tokens from a bunch of casinos, would it work in my machine if I change the comparator to one of the casino slot tokens?  Basically my question is, would a token from say MGM work with a token from Imperial Palace thats in the coin comparator?   Thanks for your help, and does anyone know where to get $1 slot tokens?

Also would Ike dollars work in the machine without any mods besides the comparator coin being changed?


Title: Re: $1 slot token help
Post by: cowboygames on January 23, 2012, 08:50:00 PM
Used to be, back in the day, you could walk from casino to casino and use your tokens. They'd buy them back from each other, so the coin comparitors obviously didn't care. Not sure if this holds true anymore :103-


Title: Re: $1 slot token help
Post by: SLOTMAN on January 23, 2012, 09:08:27 PM
Fisch, I have plenty of nice gold $1 tokens for sale if interested, they are also Fannini so they are guaranteed to work.


Title: Re: $1 slot token help
Post by: knagl on January 23, 2012, 09:53:16 PM
The coin comparator compares the metallic content of the sample coin to the metallic content of the coin being dropped into the slot.  You can turn the sensitivity down on the comparator which will make it more likely to accept a coin that is "close", however if you have two tokens of vastly different metallic content, chances are that it will get rejected.

I'm not sure of the size of Ike dollars -- if they're similar in diameter then they should work.  If they're decently smaller or larger, though, they'll likely get jammed in the hopper.


Title: Re: $1 slot token help
Post by: fisch on January 23, 2012, 09:59:14 PM
The ones I'm using now are 1.472    the Ike ones are 1.202    Do you think they would jamm up in the hopper?


Title: Re: $1 slot token help
Post by: zarobhr on January 23, 2012, 10:50:13 PM
The ones I'm using now are 1.472    the Ike ones are 1.202    Do you think they would jamm up in the hopper?
Ikes are  1.5 inches (38.1 mm) in diameter , thats way different from your 1.202

edit  1.205 is Half dollar size (50 cent)


Title: Re: $1 slot token help
Post by: fisch on January 23, 2012, 11:55:54 PM
that was a dumb mistake,   :279-   Now that I look on the back of the coin, it's a half dollar

I'll have to go find some Ike's now and try it.