|
Title: Bally E-2241 No pay out problem Post by: brinkeusa on January 24, 2012, 06:33:31 PM After having the Bally E-2241 for over a year without any problems, the hopper does not pay out anymore.
Sometimes the hopper fuse melts, sometimes the machine trips the circuit breaker for the entire group in the house. After a pay out is required the bell rings and nothing gets paid out and I get code 32. Seems hopper related?! I rebuild the hopper motor and using a 12Volt battery charger, the motor is not strong enough to start spinning. (only drawing about 1.5 to 2 amps) Anybody got any ideas what this can be? Please help! Wil Brinke Title: Re: Bally E-2241 No pay out problem Post by: Jim on January 24, 2012, 07:44:51 PM your triacs and diodes are probably toast, located on the hopper control board, right behind the fuse that is melting.
the motor runs on 115 vac. contact Foxsslots1 a member here, he has new control boards. Jim Title: Re: Bally E-2241 No pay out problem Post by: FOXSSLOTS1 on January 25, 2012, 09:16:49 AM I agree your hopper control board is defective. we sell replacement boards - follow my link at top of NLG home page
Title: Re: Bally E-2241 No pay out problem Post by: brinkeusa on January 25, 2012, 12:07:17 PM Thanks, I just ordered one from your ebay store. (resourcemom2003).
Hopefully this will fix the issue. Title: Re: Bally E-2241 No pay out problem Post by: FOXSSLOTS1 on January 25, 2012, 12:23:53 PM our reengineered boards eliminate the redundant and problem circuits - work perfectly on e1000 or e2000 hoppers.
|