|
Title: battery number for the round coin battery on a vision cpu Post by: jrsyjohn on January 30, 2012, 09:00:57 PM Looking to find the battery number for the round battery on my igt vision cpu. Getting a low battery on the machine and i need to change it. Thanks to all! John
Title: Re: battery number for the round coin battery on a vision cpu Post by: Foster on January 30, 2012, 10:21:11 PM What is the exact error message?
Vision and Reel Touch have 3 batteries A battery in the top box computer, and 2 batteries on the MPU the ones you need to replace to prevent errors are both coin sized batteries. Depending on which MPU you have you can remove the large battery from the MPU (50x MPU's only) do not remove it on a enhanced 1270 MPU. Title: Re: battery number for the round coin battery on a vision cpu Post by: stayouttadabunker on January 30, 2012, 11:59:35 PM My coin cell battery on my Vision machine's 502 version MPU is a Panasonic BR2330 3 volt.
It also says "Japan Lithium Cell" on it. Be right back with a better picture of the battery! Title: Re: battery number for the round coin battery on a vision cpu Post by: jrsyjohn on January 31, 2012, 10:53:39 AM well guy's that's the answer i need. thank you to both!!!
Title: Re: battery number for the round coin battery on a vision cpu Post by: morspeed on February 01, 2012, 09:52:16 PM If you are any good at soldering you could put in a battery holder for a 2032 battery for like a 1.00 from radio shack and slip in a 2032. Then when it dies it is easier to change them. All you need is to make sure you have the correct voltage. 2032 works great. And a lot cheaper. You can buy them anywhere like walmart. You are gonna have to unsolder and solder the new battery in anyway. Just put in the holder instead and you don't have to order it.
|