|
Title: s2000 help on a reset Post by: morgansinpv on February 04, 2012, 07:45:32 PM all right
heres what i have original battery low fixed that thanks to all the help in the process of doing the battery i must have pushed buttons cause the bill validater was not working, tried everything you all gave me no luck so i decided to do a complete reset with a clear chip, now going through the key chip settings i cant seem to set the wwan/ ipc setting, i think i need to get it to wwan. is there someone who can pst a complete walk through of all the setting in order i need to put them. thanks for all the help in advance scott Title: Re: s2000 help on a reset Post by: Foster on February 04, 2012, 11:08:40 PM Sounds like you have 362 or another SG (Game) chip
pick a non zero wamm address in 3.4.3 then try key chip again. But WAMM is 7.1.4 (key chio) and 3.4.3 options if you really want to avoid it get a set of 363 SG (Game) chips This one of two reasons I hate 362 the other reason I hate 362 is I run a progressive and every game change I had to key chip it to enable progressive again. Title: Re: s2000 help on a reset Post by: morgansinpv on February 05, 2012, 06:48:43 PM 1 have a 362.
i seem to get to a point where it is asking me to set the wann/ipc call attendant. still need help.. i hope im close but this still has me puzzled. bill validator light still not on but is downloaded in help Title: Re: s2000 help on a reset Post by: morgansinpv on February 05, 2012, 07:54:46 PM what are my crc settings for they all say not responding under the bill vallidator sub menu 4.8
Title: Re: s2000 help on a reset Post by: Foster on February 05, 2012, 10:38:31 PM When you have an error or tilt that says Call Attendant the machine is not ready to play or accept any bills.
did you get the Setting for WAMM resolved? IF not you have to get that configured then we can work on the Bill Validator Near where the inside light (careful it gets hot) is the connections to the BV from the machine. a 5 pin, 2 pin and a 4 pin with only 2 wires make sure they are connected. Title: Re: s2000 help on a reset Post by: morgansinpv on February 05, 2012, 10:53:27 PM wann is fixed.
during all my other issues starting with low battery. i prob have a bunch of settings wrong. but wann is fixed next Title: Re: s2000 help on a reset Post by: Foster on February 05, 2012, 11:28:19 PM The only other setting you need to worry about are limits, hopper or printer settings. sound, and denomination.
Hopper, Printer, or Both? Con or Coinless? For the normal home user most of the rest can be left at default. Title: Re: s2000 help on a reset Post by: morgansinpv on February 05, 2012, 11:31:03 PM i might have changed some being finger pushy. just been frustrated
if i do a total reset will that put them in default mode, and then set what i need too |