|
Title: bill box extractor Post by: jash123 on February 08, 2012, 11:33:20 AM I have a sigma sg 150b I need a bill box extractor or if someone Can tell me how to a modified
Thanks jim Title: Re: bill box extractor Post by: Jim on February 08, 2012, 01:37:31 PM I have never worked on a 150 model. if its anything like the SG-32 and 50 model, you can do 1 of 2 things: remove the stacker (use a old credit card and slide it in and release one side at a time). there should be a set of switches (usually located on the bottom) tape those in the down position. that would tell the machine the stacker was present ,even though its not.
permanently change the wiring to show the machine that the switch is in the state that it would be in when the stacker is present. so now the bills will just fall into the stacker area. Jim Title: Re: bill box extractor Post by: jash123 on February 08, 2012, 01:58:24 PM Thanks so much it worked great
Thanks again jim |