|
Title: UPRIGHT VIDEO BACKPLANE PINOUT Post by: spooksab on February 09, 2012, 04:34:10 PM Hi Anyone there knows the pinouts for the touchscreen controllers,
Title: Re: UPRIGHT VIDEO BACKPLANE PINOUT Post by: dragster73 on February 09, 2012, 04:36:52 PM From glass to controller? Or controller to what? I just wired mine into the existing plug that was there for the crt.
Title: Re: UPRIGHT VIDEO BACKPLANE PINOUT Post by: spooksab on February 09, 2012, 04:46:45 PM Just the pinout from the back plane board, on mines i have 3 yellow and 2 black, what im trying to figure out is the voltages on those 5 cables, +5,-5,vdc, gnd etc, any info would do, i do hope im explaining it correct
Title: Re: UPRIGHT VIDEO BACKPLANE PINOUT Post by: spooksab on February 09, 2012, 04:48:22 PM we have some vision pro 19 monitors that came with USB, so basically im trying to remove the USB and connect it directly to the backpane board, so i assume i need the correct pinout to connect the wires correctly, i do hope it works, if not you can advise
Title: Re: UPRIGHT VIDEO BACKPLANE PINOUT Post by: dragster73 on February 09, 2012, 05:37:24 PM The USB is coming from the Micro Touch Controller?
You may have to get a different controller. Can you take a picture? I just changed mine over last week. Here is a link to the pictures. http://newlifegames.net/nlg/index.php?topic=16922.0 (http://newlifegames.net/nlg/index.php?topic=16922.0) Title: Re: UPRIGHT VIDEO BACKPLANE PINOUT Post by: beko on March 24, 2012, 06:52:35 PM Hi spooksab.
Did you ever get this to work on the usb vision pro LCD in a wms |