|
Title: upper power supply Post by: havasu on February 13, 2012, 09:14:43 PM i know this has been covered a few times already ,but still tring to find upper power supply. the orig. one i have is unrepairable,i was told. so need a new one. looked at the link that was posted over a year ago but not sure if is still the same part number i need,page comes up blank. so any new info would be great. thanks James
Title: Re: upper power supply Post by: Neonkiss on February 13, 2012, 09:21:08 PM Original part is a PU110-12A
single output of 12V at 9A Title: Re: upper power supply Post by: hdm72222 on May 12, 2012, 10:21:21 PM Buy an ATX power supply 600 watts.
That is all. Thanks. Title: Re: upper power supply Post by: Buzz on May 12, 2012, 10:24:27 PM powersupplydepot.com enter in search box PU110-12A Last time I looked they were 20 dollars.
Title: Re: upper power supply Post by: Fourbyracer on May 12, 2012, 11:21:00 PM powersupplydepot.com enter in search box PU110-12A Last time I looked they were 20 dollars. search returns "There were no results from your search : PU110-12A". I agree, go with an ATX. I have a 480w power supply running my dotmation right now and works fine. Title: Re: upper power supply Post by: tollguy316 on May 13, 2012, 12:18:27 AM Someone bought the remaining 76 units from Powersupplydepot.com last year. I've seen the "how to " pics for the ATX power supply; and I'm not afraid to admit that I'm not comfortable messing with the wiring of the Power Supply... For that reason; I always opted to just get another original one when one went bad. I realize I'm in the minority on the ATX PS; but that's just me. I do have extra Upper Power Supplies If you should choos not to go the ATX route... Good Luck, Bill
Title: Re: upper power supply Post by: Buzz on May 13, 2012, 01:15:58 AM Kirk Las Vegas had a source for them, send him a PM. I had it saved in my PMs but when the site went down Joey ask us to delete all that kind of stuff. BLAME Joey, I do !!!!!!!!!!!
Title: Re: upper power supply Post by: lindam1 on May 13, 2012, 01:42:22 AM I also have an ATX in 2 of my WMS 400's. They work great. there is a post here somewhere with a very easy mod. with pics and good detail on how to. Search "WMS power supply"
Title: Re: upper power supply Post by: Buzz on May 13, 2012, 02:11:38 AM Well I'm with Bill, I'd rather take a beating than cut a wire.
Title: Re: upper power supply Post by: Fourbyracer on May 13, 2012, 02:12:13 AM I just looked at how my power supply is wired in my WMS 400 and there is no modification to the ATX power supply, except the cutting of one red wire. I bought my machine this way so I dont have any experience actually putting one in but it has worked for years in this machine. The plugs plug right in from the ATX to the stock connections on the slot machine and only 2 are needed: a 4 pin square one in the dot box and a 4 pin flat one on the back of the screen. Here are a couple of pics.
Title: Re: upper power supply Post by: knagl on May 14, 2012, 01:14:11 AM there is a post here somewhere with a very easy mod. with pics and good detail on how to. Search "WMS power supply" We have the posts stickied at the top of the WMS Reel category for easy reference. :71- Title: Re: upper power supply Post by: hdm72222 on May 14, 2012, 10:51:35 AM That is right. I have used ATX power supply for years and no problem.
Pay special attention to its fan. Keep it clean for better results. Thanks. |