|
Title: Bally 5500 blazing 7's-what do I need to make it a stand alone progressive? Post by: Jordan on March 08, 2012, 02:36:12 AM Hi, I have a Bally 5500 blazing 7's slot, game is working great but I would like to make it a stand alone progressive.
Can it be made to a stand alone progressive machine & if so what would I need? The glass in the machine was for a progressive machine. Thanks for any & all answers. Jordan Title: Re: Bally 5500 blazing 7's-what do I need to make it a stand alone progressive? Post by: bruno on March 09, 2012, 01:57:32 AM Hi Jordan,
You need a controller with meter like Mikohn Cham II+ (see pic) And for harness and setting instructions, better than any manual would give, I recommend you read the excellent post by StatFreak >>> http://newlifegames.net/nlg/index.php?topic=7606.0 Hope it helps Bruno :88- Title: Re: Bally 5500 blazing 7's-what do I need to make it a stand alone progressive? Post by: Jordan on March 10, 2012, 04:39:58 PM Thanks bruno,
I saw that post by StatFreak & that is what made me want to attempt it. Another question, the quarters are getting pushed/wedged under the knife & not paying out, is there an adjustment that I am missing or do I need to replace the knife? Thanks Jordan Title: Re: Bally 5500 blazing 7's-what do I need to make it a stand alone progressive? Post by: bruno on March 11, 2012, 10:14:07 PM You must empty the hopper, check that nothing is stuck under the knife and then remove and clean.
A simple adjustment is usually enough. |