|
Title: How to program an M+ Post by: jbshocks on March 09, 2012, 08:38:15 PM According to the M manual an M type machine has a attract mode that can have a programmable message on the display that it talks about how to program. The trouble is it mentions using 2 buttons and rotating the jackpot reset both clockwise and counter clockwise. I only have a M manual not an M+ (my machine is M+) but I would assume the same attract feature would be available. The M+ does not have 2 buttons so at a minimum that part of the procedure would be different. Also my jack pot switch is broken but it only has 2 wires so I would assume there is only one direction and no clockwise or counter clock wise. I would think you either close or open the circuit. Can anyone confirm if you can put a custom message in the M+ and if so how? Does anyone have the correct M+ manual?
|