|
Title: Glitchy S6000 board Post by: b5srt on March 10, 2012, 01:56:51 PM I just finished shopping a machine and it appears I have a bad or glitchy board. The machine will run and sit idle fine then within a 1/2 hour I will get an "81" error code. Once I open the door and try to reset or just open and close the door, sometimes it will go away but most of the time it will turn into different 80 or 83 codes with all the lights flashing. I have changed the battery twice with a tested 3.7V, I have replaced both the personality, main chips and the U20 & U45 ram chips and have performed complete ram clears many times. I have checked the pins in the back of the board and all appear to be good. I have put this board in different machines and it will do the same thing. Any ideas ????????? Thanks :103- :103-
Title: Re: Glitchy S6000 board Post by: b5srt on March 10, 2012, 04:40:51 PM I just finished shopping a machine and it appears I have a bad or glitchy board. The machine will run and sit idle fine then within a 1/2 hour I will get an "81" error code. Once I open the door and try to reset or just open and close the door, sometimes it will go away but most of the time it will turn into different 80 or 83 codes with all the lights flashing. I have changed the battery twice with a tested 3.7V, I have replaced both the personality, main chips and the U20 & U45 ram chips and have performed complete ram clears many times. I have checked the pins in the back of the board and all appear to be good. I have put this board in different machines and it will do the same thing. Any ideas ????????? Thanks :103- :103- Think I found the problem....It seems like the battery negitive trace on the circuit is loose so I put a tracer wire from the negitive terminal on the battery to the ground test terminal on the board........So Far So Good......Will keep you updated. Title: Re: Glitchy S6000 board Post by: b5srt on March 13, 2012, 05:15:36 PM Solved.....3 days and no more issues
Title: Re: Glitchy S6000 board Post by: FORDSBS on March 13, 2012, 05:51:30 PM :259- FOR SHARING.
|