|
Title: Changing pull handle Post by: FORDSBS on March 14, 2012, 05:11:53 PM On a Bally 6000 I have a dumb question. How do I take pull handle from ratchet.
I know how on an IGT, you have screw in bottom. But on Bally there is no hole in bottom of cover. Thanks for any help, Ford Title: Re: Changing pull handle Post by: Bettor Slots on March 14, 2012, 05:15:27 PM Look at the mechanics from inside the machine....find a large bolt in the middle and remove. Once out the handle is free.
Title: Re: Changing pull handle Post by: FORDSBS on March 14, 2012, 05:17:04 PM Thanks Jim :244- :244-
That was easy Title: Re: Changing pull handle Post by: OldReno on March 14, 2012, 05:46:15 PM Put some grease on the threads before reassembly. That's a high grade bolt so you can snug it up pretty tight. At least it should be....
Title: Re: Changing pull handle Post by: Bettor Slots on March 14, 2012, 06:21:48 PM .
Title: Re: Changing pull handle Post by: FORDSBS on March 14, 2012, 06:22:56 PM That's it Jim, you gave me an EASY BUTTON.
|